Other Network Architecture Subjects

Specifically in the UK, I'm trying to find out how the burst works that you experiance at the start of a download for a typical DSL service in the UK.What determins the max speed you can burst to, available unused bandwidth at your exchnge; i.e. the ...

Hi,We want to get MIB files for snmp v2 from Cisco 2851 Router running with IOS below,c2800nm-advsecurityk9-mz.124-15.T7.binPlease suggset for this, attaching show version.Regards,Ashutosh

Dear Sir,I got a problem when I try to create a VLAN in a 7613 router. The screen capature like the following:router(conf)#vlan 1045router(conf-vlan)#exitVLAN(s) are not available in Port ManagerThe VLAN is failed to create. The VLAN range which is...

Can we use all four E1 (i.e.  8Mbps) connections for IMA on IMA-4E1 card in a CS2811 router.What is the maximum speed supported for IMA service provided we have the appropriate chassis and cards.

Having a problem with a configuration of our guest network and our content filter (S170 IronPort). The 1841 has 3 interfaces. 0/0 is on the LAN side, 0/1/0 is connected to the Ironport, 0/1 is connected to the ISP. So we would like to redirect all tr...

Hi guys,Just a little help. Multiple Services under Multiple Billing plans on a CSG.I want to put some of these services (not all in the same billing plan) in passthrough mode.Basically so the request or CDR is not sent to QS. I would have thought it...

Hello People,                         I am facing a issue with my ISDN Connection, when I check the ISDN status below is the outputGlobal ISDN Switchtype = basic-net3ISDN BRI1/0 interface        dsl 16, interface ISDN Switchtype = basic-net3    Layer...

Hello,On my production routers and switches I use real Cisco CompactFlash cards.But for my lab gear, it seems a bit of overkill. I know Cisco does not "support" non-Cisco CompactFlash, but do you know if it will work?This is for a 4500 switch and 38...

Hi There, I am very new to Cisco and am interested in learning how to program up some devices. I have a Cisco SR520 Wireless ADSL Router and am trying to configure it using the Device Setup Wizard in the Cisco Configuration Assistant Software.I get t...

Hello,I am facing difficulty understanding the calculation of both Bc and Be in traffic policing but let's ignore Be for a moment. The below formula is used to determine the number of tokens that are filled in the Bc bucket:Bc = Current_Packet_arriva...

Hi,I have two 1921 IOS 15.1.4(M1) Universal Data.I want to simulate 8 simultaneous rtp g729 voice streams between the two routers across an MPLS network. I cannot complete a mediatrace hop across the MPLS network, the two routers can ping one another...

Hi all,   I have uploaded CISCO-ENVMON-MIB.my for my Cisco 3560 Switch. But I would like to know what all details I can able to view? Is it possible to check the temperature, power details etc. Now I am able to see only Power and fan status ok only.n...

Hi,     I am requsting an mediatrace command from the application to router via WSMA.During that I gotta error "Max Response time 10 seconds exceed"     For that I dont find listener schema for setting the timeout event.In some article I found MaxWai...

Can someone please help with a comprhensive list of whatcommands/features are in what IOS license (IP base K9, UCK9, SecurityK9, DATAK9)?Thank you,