Hi, In this design shown above. Which device is my perimeter device. Switch 1? Thank you for your help.
Forum Posts
Resolved! Update C3850 from 3.x to 16.x
Hi all,Iam about to update a stack of two C3850 switches from a 3.x version to a 16.x version.Somewhere I read that you have to generate a new RSA key before the update. Is that correct?And are there any other things to keep in mind? Thanks for any h...
Hello, I am trying to configure a FOG imaging server in the EVENG topology, and FOG needs to load window 7 through the PXE boot, In topology ESXi is the FOG server and I want it to take the image from window 7. However, to take the image from window ...
Hi, I want to say that I'm completely new to this!I've been following The Getting Started with Cisco Packet Tracer course, and I'm currently trying to create a simple network.My problem comes when I connected my cable modem/wireless router with a cop...
How do I enlarge the font in Packet Tracer Activity box?
Hello all, I'm beginner in networking. I need to build a new network architectures in a building. Actually, the building have one network for two compagnies. I want to spit it in 3 networks : - Internet provider network- Company A network- Company B ...
it is a problem ?
I am trying to test hsrp on packet tracer simple lab, am I missing something in my topology? Router#1----Router#sh standbyFastEthernet0/0.10 - Group 10State is Active5 state changes, last state change 00:00:27Virtual IP address is 192.168.1.1Active v...
Hi I am looking at the cisco ISR4331 and KVM.I have installed a linux guest on the device. Questions are there any matrix tables with specifications as to what platform supports1) How many guest can one ISR support2) How many vCPUs can a guest use3) ...
Hello, For a school assignment I'm working on a network with a router connected to an ISP on one end, and to a switched network on the other end. I want to show that I've understood redundancy so I made two connections from different switches to the ...
Resolved! Build new network
I need to build a new network from "scratch" with about 50 vlans for separation built with c3750G stacks. Is there a tool to help automate all of that instead of manually designing and configuring everything?
Resolved! Urgent -Password recovery with the 3650
Hi ,I have a great problem ,it is very urgent ,I have lost unfortunately username and password of console ,I cant access it ,my switch is 3650 .I follow all steps mentioned in official site ,but I encounter with the error of read only file system af...
Hi, I am wondering if someone might guide me in the right direction to an issue I have found. I have multiple ISR4331 routers which has been configured for SNMPv3 for a long time. Most are on version 16.12.05, and I have a couple that have been upgra...
I had been using packet tracer 7.22 earlier. this week was trying to access but it freeze at the login screen as below picture.Please help.Thank you.
Resolved! Share port Adapter on ASR 1001
Hello,I have a SPA-5X1GE-V2 for ASP 1001. Do I need to shutdown the router for me to add the adapter or I can add while the router is ON running. Thanks. BR,Zaya
