Can anyone explain the diffrence between SNMP poll and Trap.Also if i do a simple SNMP poll, what all information we can get with the community string provided
Forum Posts
Hi Team,I have a Synchronisation ringing issue between Jabber Application and DECT phone for some users for the same number.When they Receive call it should be ringing in the two system but the call ring only in one of them not in both. please suppor...
Good morning.I'm trying to set up a connection of my router to the switch through a copper wall mount in physical view, however a red upside-down triangle appears and i am unable to connect it to the switch.Also just asking, its supposed to connect t...
Dear,I am facing a problem about the output of the show tech command. Indeed, when I try to display it on the screen, it's too long so impossible to handle it.Then, I decided to send the output into a file on a windows server like this : R1# sh tech ...
Resolved! Voice Site-to-Site MTU Concerns
Hello beautiful people! I'm looking to get feedback on how people are utilizing MTU and TCP MSS on their sub-interfaces. I'm having sporadic issues with my ShoreTel communication from my Branch sites over to my DC where the PBX is installed. ShoreTel...
I have a serial line that bounces periodically. I've had the carrier test it extensively with no problems found. Today I turned on "debug serial interface" and I see the the hdlc keepalive sequence messages. I'll see the interface miss 3 keepalive...
Hi there all,Currently exploring our new ISR 4k router.ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.9.5 We have installed a UCS-E160S-M3/K9 - server. The purpose is to test the ability of this thing in our network. Dream goal is install...
I have connected all my devices to my internet server with IP addresses, however, it seems they are not connected to the internet.
I've read how to do this, and it's quite easy. This is the same method I used on a Cisco ISR4321 router and it works fine, but no so much on the Cisco 3850 switch. Config is below, and the error message / error condition is at bottom....no service pa...
Resolved! Nexus 5548 NTP Event
Greetings, This compnay is using Nexus 5548 System Version : 5.0(3)N1(1c) For few days, these logs are showing and I have no clue why... 2018 Sep 19 : 22:44:31 ##### ntpd[4740] : ntp: event EVNT_PEERSTCHG 2018 Sep 19 : 22:44:31 ##### ntpd[4740]...
Hello,I have the following topology wher PE4 is a provider edge of an MPLS cloud, and Internet is a simple router.PE4: F0/0 192.168.54.2/30Internet E3/1: 192.168.54.1/30 I would like to ping those two router between them. Therefore I ran the followin...
Has anyone noticed that there is a bogus website http://serialnumbervalidation.com/64253/cgi-bin/index.cgi that claims to check for the Clock Signal Compenant failure but returns inconsistent results? It returns "not affected" no matter what you typ...
Hello I need some assistance with remote access VPN. Our current VPN client connects thru one ISP1 to our ASA. We would like the VPN client to use both our ISP's. How can i accomplish this design? Do i need to have another ASA pair? ISP1 = 100MbISP2 ...
Resolved! asr1002-x pseudowire
Hi all,can anyone point me in the right directionMy customer is asking for an ASR1001-X to create a pseudowire connetion on a mpls circuitThe Asr already has an advanced enterprise services licensemy question is do i need to supply any other licenses...
Hi there,a few days ago I started introducing myself with the first course for CCNAv7. All is fine so far but I would like to have solutions for the labs. Especially longer taking labs, like "11.9.3 Packet Tracer - VLSM Design and Implementation Prac...
