GSM Callback with a BRI interface and Radius Authentication

[stocale]

Hello

Is it possible to perform a GSM (V.110) Callback with a BRI interface and Radius authentication? And perhaps someone has a example configuration!?

Alex

[#2]

The following URL has a sample configuration for a T1 line, Async and ISDN. Calling from GSM to T1 line is straight forward

AS5300 Dialing out with ISDN/Async (Outbound DDR)

http://www.cisco.com/warp/public/793/access_dial/1.html

Configuring an Access Server with PRIs for Incoming Async and ISDN Calls

http://www.cisco.com/warp/public/793/access_dial/5300.html

Configuring Dialin and Dialout on the Same T1/E1 PRI Circuits

http://www.cisco.com/warp/public/793/access_dial/pri_dialin_6435.html