%MPLS_TE-5-LSP: LSP 2.2.2.2 5_167: DOWN: path error

[sitalzshah999]

 I can't bring up a MPLS TE tunnel with fast-reroute Node Protection, here is the error I get. *Feb 18 11:21:31.137: %MPLS_TE-5-LSP: LSP 2.2.2.2 5_192: DOWN: path error I attach the headend's config  interface Tunnel5  ip unnumbered Loopback0  tunnel mode mpls traffic-eng tunnel destination 6.6.6.6  tunnel mpls traffic-eng autoroute announce tunnel mpls traffic-eng priority 7 7  tunnel mpls traffic-eng bandwidth 500  tunnel mpls traffic-eng affinity 0x0 mask 0x0  tunnel mpls traffic-eng path-option 1 explicit name PATH_P5_IN  tunnel mpls traffic-eng fast-reroute node-protect end The PLR's config  interface Tunnel4  ip unnumbered Loopback0 tunnel mode mpls traffic-eng tunnel destination 5.5.5.5  tunnel mpls traffic-eng priority 7 7  tunnel mpls traffic-eng bandwidth 4000  tunnel mpls traffic-eng affinity 0x0 mask 0x0  tunnel mpls traffic-eng path-option 1 explicit name INCLUDE_P4 end  interface GigabitEthernet4 ip address 192.168.57.4 255.255.255.0  ip router isis shutdown  negotiation auto mpls  ip mpls traffic-eng tunnels mpls traffic-eng backup-path  Tunnel4 no mop enabled  no mop sysid ip rsvp bandwidth 1000000 en

[MHM Cisco World]

Share config if you can

MHM

[Torbjørn]

This community question be useful to you: https://community.cisco.com/t5/other-network-architecture-subjects/mpls-te-5-lsp-lsp-2-2-2-2-5-167-down-path-error/m-p/4980878

[Harold Ritter]

Hi @sitalzshah999 ,

Can you provide the output from a "show mpls traff tun tu5" from the headend and "show mpls traff tun tu4" and "sh mpls traff fast-reroute database backup" from the PLR, when gig4 is down.

Regards,

[Ruben Cocheno]

@sitalzshah999 

Try next-address 192.168.24.4 2: next-address loose 192.168.57.8