Hi,
I accidentally deleted the IOS on a C886 before reloading. Not really a problem, but “no service password-recovery” is configured. Now the router is booting in a loop and I can't get into ROMMON to install a new IOS. BREAK doesn't work either, as it is intercepted by the IOS, which is no longer there... what can I do?
Removing the CR2032 battery and pressing/holding the reset button has no effect at all.
BR,
Jens
_______________________________________
ROM: Digitally Signed Production Software
C886VAJ-K9 platform with 524288 Kbytes of main memory
Main memory is configured to 32 bit mode
Upgrade ROMMON initialized
PASSWORD RECOVERY FUNCTIONALITY IS DISABLED
boot: cannot determine first executable file name ondevice "flash:"
System Bootstrap, Version 15.4(1r)T1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2014 by cisco Systems, Inc.
Total memory size = 512 MB
Field Upgradeable ROMMON Integrity test
_______________________________________
ROM: Digitally Signed Production Software
C886VAJ-K9 platform with 524288 Kbytes of main memory
Main memory is configured to 32 bit mode
Upgrade ROMMON initialized
PASSWORD RECOVERY FUNCTIONALITY IS DISABLED
boot: cannot determine first executable file name ondevice "flash:"
System Bootstrap, Version 15.4(1r)T1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2014 by cisco Systems, Inc.
Total memory size = 512 MB
Field Upgradeable ROMMON Integrity test
_______________________________________
ROM: Digitally Signed Production Software
C886VAJ-K9 platform with 524288 Kbytes of main memory
Main memory is configured to 32 bit mode
Upgrade ROMMON initialized
PASSWORD RECOVERY FUNCTIONALITY IS DISABLED
