Re: WAN (2014) to SD-WAN

Uhmazing · ‎09-07-2020

.

Georg Pauwen · ‎09-08-2020

Hello,

your best option is to use a general network design tool (see link below for a selection), as a dedicated SD-WAN design tool is not available.

https://www.dnsstuff.com/network-design-tools

If you are completely new to Cisco SD-WAN, I would start out with the guide below:

Cisco SD-WAN Design Guide

https://www.cisco.com/c/en/us/td/docs/solutions/CVD/SDWAN/cisco-sdwan-design-guide.html

Ruben Cocheno · ‎09-09-2020

@Uhmazing

I do really suggest you to get some good Cisco ebooks about WAN & SD-WAN, also some good training companies out there providing really good training.

Tag me to follow up.
Please mark it as Helpful and/or Solution Accepted if that is the case. Thanks for making Engineering easy again.
Connect with me for more on Linkedin https://www.linkedin.com/in/rubencocheno/

paul driver · ‎09-13-2020

Hello

Hoiw large is your company the reason i ask is if it a relative small - medium sized network then would strongly suggest have a look at meraki for a simple sdwan network - is extremely easy to use and excellent way to start you sdwan/access adventure

Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

Remove