Vlan Topology changes Spanning tree

[Juraj Papic]

Hi all, 

I have the following 2 issues, and i would like to know if they are related or not.

1.-This is for all the trunks ports, This is connected to wifi devices.

Sep 28 12:34:10.041: %SW_MATM-4-MACFLAP_NOTIF: Host 08d2.3e08.e0e4 in vlan 667 is flapping between port Gi2/0/45 and port Gi3/0/1

2.-  Will the topology changes will be inside the normal values or  I will be facing loops in Spanning tree?

VLAN0006 is executing the rstp compatible Spanning Tree protocol
Number of topology changes 307 last change occurred 13:48:43 ago
from GigabitEthernet3/0/1
VLAN0666 is executing the rstp compatible Spanning Tree protocol
Number of topology changes 232 last change occurred 00:05:26 ago
from GigabitEthernet3/0/46
VLAN0667 is executing the rstp compatible Spanning Tree protocol
Number of topology changes 232 last change occurred 00:05:26 ago
from GigabitEthernet3/0/46
VLAN0668 is executing the rstp compatible Spanning Tree protocol
Number of topology changes 232 last change occurred 00:05:26 ago
from GigabitEthernet3/0/46

[Georg Pauwen]

Hello,

what is the root device for the respective Vlans ? Post a schematic drawing of your topology showing how all devices are connected..

[Juraj Papic]

This will be the core switch and will be the Root for all the vlans. 

[MHM Cisco World]

wifi are you use any mesh ?

[Juraj Papic]

I would have to check that. thanks.