Other Security Subjects

I use a server as a sniffer and running on vmware with two NICs. Each NIC is linked on a SPAN destination port which are located on two differents swithes. My question is : Can I get access to my server by enabling the ingress option on a SPAN destin...

Hi,We have a CISCO 2901 router as a gateway with the internal network 192.168.30.0 0.0.0.255 configured on Interface Gigbit 0/0 and a VLAN for wifi guests 192.168.31.0 0.0.0.255 on Interface Gigabit 0/0.1 I have tried to configure ACL on interface 0/...

Hi Dearone of my cisco 7206 NPE-G2 is rebooting intermittently. I did some checking that you can see below.Cisco7206#show versionSystem returned to ROM by unexpected interrupt at PC 0x71F900, address 0x71F900 (0x0071F900)Cisco 7206VXR (NPE-G2) proces...

IOS 12.4T: no radius accounting when redundancy inter-device is configuredEven the redundancy protocol is not configured with any profile, the effect of having redundancy inter-device configured as a config parameter end in suppressed radius requests...

Hi.Has anyone had any experience with configuring MACSec between two routers/switches that are the end points of a WAN/MAN circuit?We plan on using two 3750-X as the routers on a circuit that is 1Gb/s EoSDH.The thing I am worried about is that the ca...

I am not quite familiar with networking product. So may be this is a stupid question. We have recently bought a Cisco 2901 router.http://www.cisco.com/c/en/us/products/routers/2901-integrated-services-router-isr/index.html We checked the cisco heartb...

Hello allI have re-imaged my MARS-50 to the recent image version 6.1.8.3517. However, after the system is fully installed and up, I am not able to access the web interface. Actually it brings up the user login page but after that it constantly shows ...

Hi,when i i turn on my Cisco CS mars it stopped at shell mode like that : shell >Could you please help me sort it out BR

I desperately need to change my guest password as someone is using my system

Does anyone know if Cisco has a free network security audit too

Dear All,Our company have 100 users, in recent network was very slow, I log on edge router to show logging command, display as below:I want to know whether our network have some attack?  and what should I to do?Our topology is: ISP------2900---------...