Who Me Too'd this topic

I know we can create Macro's inside the templates using the VTL language, but what if you wanted to create a Macro on the switch so none PRIVI 15 users could add / remove 802.1x authentication as part of troubleshooting, or so that you could easily add / remove auth as part of troubleshooting... 

When I try to push as part of the switch provisioning in DNAC I get this error : 

Sun Oct 13 2019 15:23:11 GMT-0500 (Central Daylight Time) : Provisioning failed for the template Auth Macros.Message: Unable to push CLI ' Current output : Current expects : TEST-3850' to device 10.1.1.5 using protocol ssh2

I already tried making it interactive so it wouldn't look for the command prompt... 

MY VTL Template is : 

no macro name hmasecure
!
#INTERACTIVE
macro name hmasecure <IQ>Enter macro commands one per line. End with the character '@'.<R> authentication event fail retry 0 action next-method
 authentication event server dead action authorize
 authentication event server dead action authorize voice
 authentication event server alive action reinitialize
 authentication host-mode multi-auth
 authentication order dot1x mab
 authentication priority dot1x mab
 authentication port-control auto
 authentication periodic
 authentication timer reauthenticate server
 authentication timer inactivity server
 authentication violation restrict
 mab
 dot1x pae authenticator
 dot1x timeout tx-period 5
 dot1x max-reauth-req 1
@
#ENDS_INTERACTIVE
!