Routers - Small Business

I have recently upgraded my router from the WRV4400N to RV320. It is smooth and very fast compared to the old one. I have another task to run a networking for a 3D graphic studio: - 40 workstations,  - 4 NASs - 40 mobile devices for WIFI - 20 render...

The RV130W-E-K9-G5 supports max Wi-Fi clients of 64 according to the data sheet and our application use seems to validate this. As this product is has been declared EOL and the suggested alternative is the RV160W-E-K9-G5. However this device only sup...

Hi all, Two of the three fans in my 7200 chassis stopped working and I need to replace them ASAP.Which fans do I need and where can I get it? 

The RV340W auto updated to "Signature 2" 20 hours ago suddenly, and I am sure that set NEVER Auto Update in the config. The main issue is, the RV340W keep unstable, no response (no connection and web interface cannot be loaded). In the passed 20 hour...

If I connect with the latest Android OpenVPN it tells me, the certificates I created with RV320 are MD5 signed. Also it tells me, that MD5 support will end April 2018. So how else shall I create certificates for OpenVPN? The root cert uses SHA256 but...

I have the CISCO RV320 Gigabit Dual WAN VPN Router. When I try to access the administration page at 192.168.1.1, my web browsers displays the following error. This site is not secureThis might mean that someone’s trying to fool you or steal any info ...

Hi all,  I seem to be having a few issues connecting the RV320 to multiple subnets. What I have is a 4g cellular router acting as a gateway on subnet 192.168.2./24 which is connected to WAN1 on the RV320. The RV320 is setup as a gateway for subnet 19...

Hellois there anyone to explain how this is possible?I can see Ip address from " sh ip int br" but there is no configuration for this interface and method is unsetis it some kind of bug?please see below information for your understanding Router#sh ip...

I need to link 2 offices via a site to site VPN and at the same time allow remote clients to access the offices via PPTP. I just need to confirm that this is possible with the RV134W. I need site to site and remote access to run simultaneously.Thanks...

I have a Reset button along with the Refresh button on the Port Management -> Traffic Statistics page of our RV325 Router.  What exactly does that Reset button do? Is only for clearing the traffic data or does it reset something more than that? The d...

Hi is there a way to see the remote connections attempts in general or what IPs are using or trying to hit the port forwarding rules i have created on my RV340. thank you

Hello everyone! Thank you in advance for your help.I used google, bing, this forum, but no help.I have in my rv130 logs this entry often reoccuring: Guest session timeout.Guest account is not activated and there is no "guest login" log before, just t...

On my RV130W I have guest session disabled (box unchecked) but for some reason the logs keep showing over and over guest session timed out.  I don't see any guest sessions started so how could there be a guest session timing out?

has anyone tried to configure a l2tp vpn tunnel between 2 rv340 routers? Both routers can reach each other, they are on the same subnet. I would like to use the routers to encrypt and forward layer 2 traffics from LAN ports.

Hello,i have some routers of this model (RV130W) that when i turn it on i see blinking green LED (no too fast) and nothing happens. when i connect a LAN cable it doesn't recognize it. i don't get an iIP, so i can not login to the router and change st...