Routers - Small Business

Why is there no option in the wireless access points for a enable/disable time table? You would think that the firmware could include a time to enable and a time to disable the wirelesss signal? Personally, I would like to see this option added. No w...

Dear All, I have question about how to setup RV220W pppoe with static ip and then have different static ip subnet, below are information from my ISP PPPOE Login name: abc@aaa WAN ip: 220.2xx.4x.xx Public ip: 220.2xx.5x.xxx (0-7) Their support only...

RVS4000 router... I use to be able to do port forwarding, not so now. I'm just trying to port forward 80 to a computer for a simple server (web pages) TCP port 80 forwarded to 192.168.1.148, my computer. Is there anything else I should be checking? U...

Hola buenas tardes o noches, quiero hacerle una consulta, soy Ing. en Sistemas tengo un problema con una de las van que tengo en un RV042G a un RV120W desde hace dos años todo a ido de maravilla hasta hoy que dejo de conectar la vpn, he reconfigurado...

Has anyone had issues with compatibility issues with RV320 UPnP as it relates to NAS devices. I am not able to maintain a connection for remote access to my QNAP boxes,  and it seems the UPnP list shows the computers attached but not the NAS - I know...

I am running firmware 1.0.1.9 on an RV180.  After recently upgrading to Microsoft Internet Explorer 10, I notice the RV180 administration screens do not display properly.  Specifically, the horizontal window pane is set so high (not adjustable) all t...

So I have a Netgear SRX3508 that was setup with this config before I was here. In the SRX you can NAT through the firewall settings. I am attaching an Excel file with the summary of the  SRX3508 VPN and Firewall settings of course I have changed all...

how do I configure the rv320 for voip phones on the network

Good Morning,      I have aa ASA 5525 that will have anyconnect remotes connecting to it.  One of my groups can connect no problem, but when my second group connects the ASA generates the following error: Group <ABC> user <ME> IP <1.2.3.4> terminatin...

I have two RV042 (one in PA and one in AZ) with a tunnel between them. They work great. I have one employee that works from home occasionally.  I set up the VPN on her laptop.  She can log in to the VPN in PA and has full access to that subnet.  But ...

Hi all, I need to modify a RV220W-based setup (latest firmware) in order to apply some restrictions on VPN and it seems VPN tunnels totally bypass the firewall on this model. No matter how the firewall is configured, even with a single rule blocking ...

Hello, So I have the gateway to gateway VPN tunnel setup and working between the WatchGuard device at the main office and the Cisco RV325 at the remote office. I'd like to receive the email notification of the logs from the Cisco RV325 but I am not ...

Not all of my WAP4410N access points are UPNP. Any reason why?

I have a newly installed RV320 and I do not seem to be able to make it resolve names for DHCP clients.  To clarify, the first machines on the VLAN1 sunet can all ping each other by IP address but none of them can resolve or ping by machine name.  The...