Routers - Small Business

We've been successfully testing a VPN using the Cisco RV320 between two small offices for a few weeks before deployment but a last minute change of carrier services has forced us to use—at least in the short term—a Zyxel VMG3926-B10B VDSL gateway/rou...

Hello, I can't seem to find this information from Cisco's website or manual. I'm looking to simply find out if the SG300 switch in L3 mode supports all of the following routing protocols: EIGRP, BGP and OSPF Thanks in advance for your help.

hi, I have bought a RV320 dual wan router. I setup the router with dual wan and load balancing. the router shows the two connections as active but uses only one connection. I have 50/20 Mbit on WAN 1 and 30/6 on WAN 2 - from different ISP's. So I tho...

For fall-over protection, I recently added a (slow DSL) WAN2 to my existing RV042G . I have it working fine except that sometimes the router drops the connection to WAN2.  The symptom is that the WAN Status in the system summary goes to all zeros for...

Hi Im trying to block facebook from my office but having no sucess - be grateful if someone can provide the solution Should be simple right?

Hello, I have a cisco router, the RV220w, my issue is that when i download something its using all my bandwith for that and i can't do anything else. So i download something from the internet with 8 MB and i couldn't access any other web pages. If ...

I have one RV130 configured for receiving VPN conections from users (one user for test). I´m using shrew soft vpn client and as far as i can tell everything is well configured in client software. When i call shrew soft, i can connect to remote router...

RV 130 VPN - After I applied last firmware. 1.0.3.16 I have two problems: -1.st MSG -   on regular base   3 - 5 times per day I have these MSG:  2016-10-26 10:29:53 RV130 user.emerg  WAN Ethernet Interface is DOWN. This MSG is on all my RV130 VPN dev...

Hi, I setup IPSec Gateway to Gateway using RV325 for both locations. I was able to establish a VPN tunnel. However, I have not been able to ping the other location. Both the RV325 cannot even ping each other. Please see the attached screenshots from ...

Hi, I have added the RV130 to our small office and I want to connect to the office network from home, with a Mac, over a VPN connection served by the RV130. How do I setup the RV130 to do this? How do I setup the VPN connection on the Mac ? I trie...

Hi Everybody, Is it possible to trigger a log when an interface bandwidth consumption exceeds a threshold? An the same, but when It goes under another threshold? I want to use those logs to implement some things with EEM de Cisco. Thanks for your...

In the latest iOS 10, apple has stopped their support to PPTP and only allow to VPN to pass through IPSEC with IKEv2. I have been following this document: http://www.cisco.com/c/en/us/support/routers/rv082-dual-wan-vpn-router/model.html#End-UserGuide...

In the latest iOS 10, the VPN access is now only limited to IKEv2 I have tried step by step according to this: http://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/rv0xx/administration/guide/rv0xx_AG.pdf to set up a Remote Client Setup for both sin...

Hi, Cisco 5506X Firepower Cisco Adaptive Security Appliance Software Version 9.6(1) Device Manager Version 7.6(1) I've been experiencing issues when my Cisco firewall experiences high throughput where it'll completely disconnects and the only thing...