Routers - Small Business

hi     i just recently bought BT wifi extender 600 and when i try to setup this with cisco SRP527 . it connect with it. but for some reason my extender wifi cant access the internet. i tried the same extender with bt hub it works fine. so i am just w...

Hi All, I have been hitting a wall for a few days regarding to this IPSec problem. I have set up the tunnel from our office to our client and the following messages are constantly repeating. In the IPSec Connection Status menu, it seems like the tunn...

With SSL VPN as implemented on RV325, it is completely impossible for a 64-bit Win7 client with IE11 browser to make use of Remote Desktop Protocol on a device connected to the RV325 (i.e., the Windows device acting as a server).I'm connecting, but I...

Hi guys,      Good day! I would like to ask a questions if it is possible to run the VPN in RV180W even it is set to AccessPoint or WDS Bridge mode? currently our set up have a CPE router: HPA-MSR900 (ISP own) and a ASUS RT-N12HP for the wireless inf...

I'm having a problem already discussed in this community, but I'd like to know if there is any alternative solution. I'm the only one that have the password to access a Cisco RV042, and today it came with the message "Invalid Username or Password. Pl...

I have successfully configured this router as a remote site with an vpn tunnel to our main office. The tunnel works fine between the two subnets.  However, I cannot figure out how to add static routes to several subnets at the main office. One would ...

We have about 50 Cisco RV042 routers.  All are configured identically, except for changing the internal IP address, host name, domain name, and DDNS entries.  I am having trouble with just one unit.  I am assuming that it has some other setting also ...

hi,I'm searching for a router (4 ports) that can handle bandwidth managment, e.g. if there are 4 devices connected (4 IPs), each of them will have access to 25% of bandwidth. If one of them disconnect then the 3 remaining will get access to 33% of to...

I am using RV325 Cisco Dual WAN VPN router.I need to block some online shopping websites on ip range 192.168.1.30 - 180 and allow the same websites on ip range 192.168.1.2 - 29. How can I do this..Thanks.

I am confused about the RV180W startup and mirror configurations.  The docs say that the running configuration is copied to the mirror after 24 hours if you forget to save it.  Where is the button to save it?  Which configuration is used when the dev...

Hello Cisco Team, We purchased CISCO RV042 Dual WAN Router for “Load Balancing” purpose. We have a query, please guide us to configure it.IP Address in our company is same 192.168.2 series. We have 2 Internet Connections, Broadband and Lease line. To...

Hello,I upgraded the firmware a year ago when the heartbeat bug was all the rage.  Ever since the upgrade the Internet Access Policy feature would not work, specifically you cannot enter any text in the "Forbidden Domains" field of the "Website Block...

Today i installed an RV180 VPN router as replacement for a netscreen ns-5GT.Exactly the same configuration, everything works, except port forwarding from WAN to a host inside NAT.My ports are open (online port-scanner sees the ports as open), the hos...

I have a vlan question. I currently have my server on one vlan while the rest of my traffic (wireless/wire) on a seperated vlan. The problem I am having is the printer and network drive are on the server, so the other devices on the other vlan can't...