Routers - Small Business

I installed this router at a clients office, the just upgraded to VDSL2 account. The gateway at the premise is a Sagem F@st 3464AB BGC. At first, i did a speedtest without the cisco router, and that gave me something arround 30Mb/5Mb. We put the sage...

Hi,can someone please advise wether the Cisco RV180 router model can be configured with a public IP address on the LAN interface?I'm planning to use it in the following setup:Internet ------------- WAN port (public IP) RV180 LAN port(public IP)------...

So I'm trying to connect two SRP527W's.  I have 2 different sites, 2 SRP527W's, 2 ADSL connections.  I deally I would like to connect the 2 sites using an ethernet cable from the back of each SRP.  The reason why I wanbt to do this is that we are loc...

Hello,Anyone any idea what this is?Got thousands of this errors. Latest firmware is installed.

I keep getting log messages like the following on my router:[RV220W]Tue Aug 14 00:00:14 2012(GMT+0200) [RV220W][Kernel][KERNEL] BW_LIMIT_PKTS  IN=LAN SRC=10.0.0.10 DST=173.194.35.134 PROTO=TCP SPT=1159 DPT=443i.e. a large number of BW_LIMIT_PKTS mess...

Hello,I sucessfully created a VPN between a RVS4000 (192.168.1.0) and RV016. (192.168.0.0)Behind the RV016 sits a UC560. (192.168.0.121)I can ping every device on the RV016 network from the RVS4000 network, but the UC560.I can ping the UC560 from the...

I am not having much success setting up a IPSec VPN tunnel between a RV042 V3 running v4.0.0.07 firmware and PIX 525 running 8.0(4) code. Let's say the configuration looks like this: The RV042 has public IP 70.0.0.1 and private LAN IP 192.168.1.1 /24...

Hi,I am trying to connect with QuickVPN to my RVS4000 in another location. I get this message:"The remote gateway is not responding. Do you want to wait?' Any ideas? Thanks.

Hi,I have following issue with RV220W - the router seems to be dropping parts of traffic coming through it. The unit is brand new, the firewall is turned off, there are about 20 computers and 15 VOIP phones connected to it via Zyxel GS1910-48; all IP...

Our company own a RV180W router. It works well with firmware 1.0.1.9 but with firmware 1.0.2.6 it is impossible to SSH between our devices. Ping still works though.I don't know if there is another place where to report such bugs

Recently we have purchased a few SRP541W for our small branch office VPN sites. While working with the config I have discovered that when trying to create a IPSec VPN policy, I am limited to only one "remote network" entry. This is typically not how ...

Hi All,I have an ADSL connection with 16 public IP adresses starting xx.xxx.x.1, and I would like to have the public IP's addressed by DHCP to the clients.Is this possible? I've set up the WAN interface as PPPoA, turned off NAT and tried to modify th...

Statement:I have three locations using the linksys wrvs4400n router with IPSec VPNS. They all work fine and point back to a Server2003. I just added a fourth location with the same router but this new router has firmware v2.x, where the others have f...