Routers - Small Business

Customer has broken the aerial on their SR520 Router and was wanting to know if they can purchase an aerial on it's own? Can anyone suggest any options?

hi guys,I use a pretty simple configuration1 cisco SRP521W* WAN DHCP* LAN in a /28* wireless disabled* GRE tunnel enabling the access to a /11 network while sharing the local /28I configured a first router successfully : 10.xx.xx.0/28 , lan ip 10.xx....

Hello,I would like to priorize some protocols but i need some help. In fact want to priorize HTTP protocol over NNTP protocol but without limit NNTP bandwidth if HTTP is not used.If i play with high and low priority settings, NNTP speed is always red...

Hi,the small fan of a SRP541w seems to have 'melted'  it's way out of it's casing. Can anyone give me a parnumber for a replacement fan for this router?Michael

This is probably a silly question, but how can I reset the port statitics on the RV180 router without rebooting the router? I have the latest firmware.

Hi,i've installed the new firmware on my router and now the UC is showing 100% all the timeI've tried to factory reset it, it's doing the same thingIf I downgrade to previous firmware, it goes back to normal I've only 1 PC in my network (test lab), s...

I need to setup a secure connection between office and home network  for backup files to a NASOFFICE LINKSYS EA6500   HOME EA2700   ROUTERboth routers has VPN passthrough   only office has windows server 2008R2NAS is synology 212jboth networks has dy...

Hi,I configured a RV042 to load balance 2 WANs. It appears to working well but I would like a 2nd opinion as to whether or not I chose the proper settings to accomplish the task.1. WAN1(ISP1) is the existing internet connection(1.5mb T1). I have a bl...

Hello,I'm using two RV180 for a site to site ipsec vpn.The IPSEC VPN connection is working only if I try a manual connect. After some time connection is droped and no auto reconect for it.Anything to do to solve this problem?Thank you in advance!

Good morning, We have in our business some RV042 with Cisco ProtectLink Webfiltering.Until now we do not had any problem of activate the licence and it works has we axpected. But the two last time that we went through the install  procedure outlined ...

I have two RV082's connected across the internets using the primary WAN ports. They are both set to Auto Load Balance. Both ends of the VPN are set to "IP Only, IP by DNS Resolved".If I attempt to access the remote subnet, the VPN won't automatically...