Cisco’s security team has released an advisory for: RV340 Series Small Business routers (PSIRT Notice) Fix for bug CSCwc53007- RV34x GUI not accessible – The recommended fix is to upgrade to firmware version 1.0.03.29RV082, RV042, RV016 (PSIRT Noti...
Forum Posts
Hello! This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful. Virtual Assistant - Discover support content and options for your gearSupport page index - Contains a...
I am trying to make the lan side of the router use a 10.x.x.x network instead of the 192.168.x.x that it uses by default. I have the ATT gateway running to the wan port. I want the rest of the network on the other side of router using the router fo...
Resolved! Establish IPsec between RV042G and RV340
Hi people, I need to establish a VPN IPsec site to site with on one side a RV042G and on the other side with a RV340: This is the config that I have on the RV042G: And this is what I have on the RV340: The IPsec profile And the site to...
I currently have an RV345 setup with different Vlan's, setting each port to untagged where I want to use that Vlan. I am thinking of putting in a secondary switch like a SG250 to allow some devices on 2 different vlan's the communicate on, so if I m...
What do i have to configure to allow the Netgear Orbi which is a router and WiFi in one to work through the Cisco router as I have no option but one modem with only one port on it for any routers.
I can see a table of packets and bytes send/received.How can I see how much bandwidth is being used in real-time?
I came into work this morning to reports our internet wasn't working. I verified our ISP connect was up and tried to connect to the device via ethernet. I was not able to obtain a proper IP, ie got 169 IP. I power cycled the device and upon boot ev...
Hi - Just registering RV345-K9 sends router "Out of Compliance" and Smart Licensing says insufficient licenses. (I loose the two licensees that are suppose to come with the RV345!) Is this proper behavior? I was of the understanding that the R...
I have Cisco RV340 as router and a Ubiquiti Wireless access point. I want to separate different clients to their own VLANs and limit their connectivity between VLANs (e.g. not allowing IoT devices to communicate to other VLANs). My wireless AP is cur...
Hi Team,How do we Enable the secure SSL protocol of TLS 1.3 for the RV042 router and also to enable the RSA keys up to 2048 bits and also seeing TLS Certificate is not trusted and could see as the certificate is not signed by a trusted authority (che...
Hi community, I´m a private user and I bought my RV345P on ebay (maybe not the best idea...). Buying a Cisco product a first time I wasn´t aware of the licensing. One reason I bought this devices was the web filtering fearture, which as I learned now...
In order for my VoIP to work, I have to have the SIP Gateway checked under the Firewall tab. However, if I make ANY change to the router's configuration, I then have problems with the phones. We can hear the person calling in, but they can't hear us....
Is there no way to delete this user? It seems like a security flow to leave a well known user name on my router. Thanks,-Mike-
Hi, on Rv345 Click on the APPLY button (on the firewall - Access Rules) cause Remote Connected Computers (RDP) lose network connection for a Second.experience the following pop-up message:Connectin ClosedThe network connection was closed unexpectedly...
I need to block port 25 for everything but the Exchange server. I'm putting in an access rule to deny all for port 25 and adding an access rule for port 25 to allow to the IP of the server with higher priority that rule to block all.Is that the corre...
How to enable ipv6 dhcpv6-pd on rv130 when use PPOEv6?Device Model:RV130PID VID:RV130 V02Current Firmware Version:1.0.3.55 Most of new router devices support IPV6 dhcpv6 prefix-delegation even when WAN use oopev6.but on rv130 when WAN enable IPV6 and...