Routers - Small Business

Hi,I have a VPN connection between two RVS4000 routers and IP based activity works no problem.  But, even with "NetBios Broadcast" selected in the VPN advanced setup we don't have succesful netbios function.  I can edit the lmhosts file on each clien...

Just setup a brand new RV120W at my house.  I have the wireless working, LAN clients connected, even got an IPSec tunnel to the office up and running.    One of the PCs behind the router is setup as a logmein client and tech guys from the office can ...

I'm planning to use RVS 4000 in 10 of my branch offices.The current IP's of those branch offices are 10.12.0.0/16 (255.255.0.0)When trying to configure the RVS4000 LAN IP I only have a drop down for selecting the mask and the largest one is 255.255.2...

Hello,I have been trying to connect to the RV 120w via the Quick VPN client, but no success.  See program log below.  I was told by support that this is something on my machine that is using port 4500 or port 500 or both.  So running netstat shows:C:...

I am trying to set up a PPTP VPN in my home (with a Linksys RVS4000 router).  I'm using a Mac to connect.I have enabled the pptp passthrough on the router.When I try to connect on the Mac, it shows 'connecting' and then 'authenticating' and then appe...

Hello!We're using the RV082 Router and having speed & reliability issues:Facts:Firmware Version: 2.0.0.19-tmDHCPNo VPN tunnelsThe RV082 is connected to a Catalyst Router (managed through our internet provider) and has a static ipIssues:Google Maps: C...

So heres what we are looking at here: The DHCP process within your RVO82 seems to be “quitting” after a certain amount of time. This seems to be ranging over a span of a few months (4-6 months) and power cycling kicks the DHCP process back in. Once t...

Hello everyone,I'm asking for your help in order to configure my RV082. Here my problem :The RV082 is between an ISA server 2006 and 2 Internet Box with Static WAN IP Address.I didn't find the right configuration in order to have the 2 Internet conne...

hi everyone, I am having very strange matter now with RVL200. I tried to find Linksys TFTP.exe to upgrade firmware. the software told me was upgrading successfully. But now the "DIAG" keeps blinking, i could not access the router anymore.it could pin...

Hi,I have spent hours trying to get the wireless network that is built into the Netcomm NB9W ADSL router to communicate with the RVS4000 VPN router that I have recently purchased.Everything else is fine, I can connect the ADSL through to the RVS4000,...

Morning, Can you please confirm which of the new 300 series routers are fan less as there is no information on the website about it?Thanks

HELLO,I have a Linksys Range Extender (WRE54G v3) to enhance reception of the Wireless signal in my TV room downstairs.With my Laptops (both Win & Mac) I have no trouble with the Range Extender. However, I installed a WET200 (Wireless-G Business Ethe...

Is it possible to create a vpn tunnel between two RV042 routers with only one static address? Looking to connect two networks.  One with a public static address and one with a public dynamic address.  I don't want to use the dynamic dns option.  The ...

I found that RV120W WAN interface doesn't automatically re-enable after a cable pull and re-plug.  I have to go into the Status->System Summary and click the "Enable" button.  Is this normal on this router?  Can I prevent that from happening? I would...