03-05-2010 07:30 AM
Hi,
I´m seeing this lines in the VPN Log of our RV082.
My questions are:
I'm not expeting any client connecting to the RV082.
My router: RV082 with firmware 2.0.0.19-tm
Here are the logs, the repeats every day, every few hours. Please note the same timestamp in some entries
Mar 5 08:25:21 2010 | VPN Log | Received Vendor ID payload Type = [Dead Peer Detection] |
Mar 5 08:25:21 2010 | VPN Log | [Tunnel Negotiation Info] <<< Responder Received Main Mode 1st packet |
Mar 5 08:25:21 2010 | VPN Log | (NATT)Initial Main Mode message received on MY_IP:500 but no connection has been authorized. Please check your tunnel endpoint (gateway) setting |
Mar 5 08:25:21 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Mar 5 08:25:41 2010 | VPN Log | Received Vendor ID payload Type = [Dead Peer Detection] |
Mar 5 08:25:41 2010 | VPN Log | [Tunnel Negotiation Info] <<< Responder Received Main Mode 1st packet |
Mar 5 08:25:41 2010 | VPN Log | (NATT)Initial Main Mode message received on MY_IP :500 but no connection has been authorized. Please check your tunnel endpoint (gateway) setting |
Mar 5 08:25:41 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Mar 5 08:25:41 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Mar 5 08:25:41 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Mar 5 08:25:41 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Mar 5 08:25:41 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Mar 5 08:25:41 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Mar 5 08:25:41 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Mar 5 08:25:41 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Mar 5 08:25:41 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Mar 5 08:25:41 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Mar 5 08:25:41 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Mar 5 08:25:41 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Mar 5 08:25:41 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Mar 5 08:25:41 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Mar 5 08:25:41 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Mar 5 08:25:41 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Mar 5 08:25:41 2010 | VPN Log | Dynamic VPN client in Main Mode is only supported for Microsoft VPN client, please use Aggressive mode instead. |
Many thanks
Oliver
http://tinymaillto.com/oliversl <-- my email after a captcha
03-06-2010 06:40 AM
The other side RV082 VPN Tunnel was not disabled, that was the cause :(
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide