RV320 WAN connection to RV340

[RSUGmbH]

Hello community,

i´ve got 3 Cisco RV320 DUAL WAN VPN Router active at 3 different places.
These Routers are connected via WAN.
Actually we got 1 more business location for which i should buy 1 more router and connect it also via WAN to the other Routers.

Does it work, if I setup the WAN connection between Cisco RV320 DUAL WAN VPN Router and Cisco RV340 DUAL WAN VPN Router?

Thanks in advance.

[Martin Aleksandrov]

Hi there,

Yes, you can configure and run IPSec site-to-site Tunnel between the RV320 and RV340 routers. Here is the guide for RV340 https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb5513-configure-a-site-to-site-virtual-private-network-vpn-connect.html 

It is similar to the VPN setup with RV320

 https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb4939-configuring-a-site-to-site-vpn-tunnel-between-cisco-rv320-gi.html 

Regards

Martin

[RSUGmbH]

Thank you very much, i will order and try it.