Resolved! GRE over BGP
I have 3 routers R1, R2, R3 connected within same AS (IBGP).I would like to establish a GRE tunnel between R1 and R3, can someone share me some guide please.
Forum Posts
I am tasked with configuring the DHCP server to auto assign IPs to each department. Each department is in its own VLAN. The only IPs that are being assigned right now are 169.x.x.x and I am not sure why. Can anybody help?
hi ciscokindly, why i need this command , as i know when i enable bgp additinal path in RR by following command for example : router bgp 100 ( RR )address-family (ipv4/6,vpnv4,6) unicastbgp additional-path send recieve bgp additional-path select ...
Resolved! VRF export with nexthop filter
Hi guys, I try to attach an extended community to a prefix selected by its next-hop While this works perfectly with a route-map attached to a BGP neighbor, when trying to use it as an export map the router attaches the extended community to all prefi...
Is there a way I can redistribute ospf<>bgp to only to1 specific neighbor? For eg: router bgp 1neighbor 1.1.1.1 remote-as 2neighbor 2.2.2.2 remote-as 3 I want to redistribute OSPF learned routes but ONLY to 2.2.2.2. How can I do that?
Hi, I am trying to setup a Cisco 2911 with CUE running on a ISM-SRE-300 module. I was able to ping both the router IP and CUE IP when initially setting up on 192.168.1.x network. As soon as I change the IP addresses to any other network other than 1...
Resolved! Send multicast stream
Hi Can we use a PC like win8 or 10 or windows server as a video resource to send multicast stream? Thanks
Hi, We want to create IPSec site 2 site VPN tunneling between two 7600 routers over WAN. Is it possible with catalyst 7600? Can someone help with the article on configuration? Thanks in advance.
Resolved! GRE Tunnel
IP add of VPC1 is 192.168.1.10 , VPCS 2 is 192.168.2.10 GRE tunnel is configured between R3 and R4.Tunnel is up and I am able to ping the VPC2 from VPC1 and vice versa, however if I take a capture I couldn't able to see the Tunnel IP being encapsula...
Resolved! Trouble with Launching Packet Tracer
I am unable to launch Packet Tracer after downloading it from the academy On launch there is a Pop-up window that suggests that the app is unable to associate my net academy credentials and the tracer login. The result is that on closing this popup, ...
Hello,I am working on part of an assignment and I am trying to ping 2 routers. They will not ping if connected to switch 0, but will ping if connected to switch 1. What am I missing? Attached is the PT file of a smaller example of what I am working w...
Hi All,Got a question about flow-export to to vrf Mgmt-intf.asr1000 version: 02.06.02.122-33.XNF2ip flow ingress on both inbound and outbound gig interface.additional commands:ip flow-cache timeout active 1ip flow-export version 9ip flow-export dest...
hello , i have router ASR1006, Slot Type State Insert time (ago) --------- ------------------- --------------------- ----------------- 1 ASR1000-6TGE ok 7w6d 1/0 BUILT-IN-6TGE ok 7w6d 2 ASR1000-6TGE ok 7w6d 2/0 BUILT-IN-6TGE ok 7w6d R0 ASR1000-RP2 o...
Resolved! IPSec & Isakmp
Hi Guys, I'm having problems with connecting my vpn remote access through a coffee_shop internet router to my HQ router to access HQ resources. i have a crypto map for HQ router to branch router over serial link (site to site vpn works fine). ...
Resolved! BGP Error
i wanted to perform a swap of my BGP router i.e from ASR-1001 to ASR-1001-X. since this is a swap all configuration remained the same, nothing changed. when i plugged in the new router by e-BGP was not coming up. i was getting the below error message...
