Hi, I have searched this plenty nothing seems to solve.Been trying to create anyconnect network. Cannot seem to get beyond clicking connect with Windows 10 pc's. I'm using anyconnect 4.6.03049 on Windows 10.0.18363 and two other win 10 pc's, I have t...
Forum Posts
Hello, I have a machine that runs RHEL/Centos 7.x, but sometimes is booted with Ubuntu, and on rare occasions windows. Apparently the router's dhcp service sees RHEL/Centos being booted with the hardware address XX:XX:XX:XX:XX:XX and sees windows bo...
Resolved! ASA 5505 Drops Packets Despite ACL.
Hello everyone, I'm trying to ping from the outside network (PC0) to the DMZ (Web server) but the ASA keeps dropping my packets. There is a IPsec VPN configured between router 0 and router 1. Here is a segment of what my network looks like: Here is ...
Hello, wild idea, is it possible to connect a Cisco RV320 (small business router) with it's WAN port to the GigabitEthernet0/1 of a Cisco 2911 router. Later I can figure out what subnet to use on the RV320 (but possibly and a subnet in two with 1...
what tools are best recommended that can help idenitify slow routers or fiewalls with intermittent latency issues?We are having jitter intermittently on voip calls possibly because of a lag in some hopsIn a single trace (for example in windows) to a ...
Resolved! TCP connection problems
Hello, for the start, English is not my first language, so I may express my question not accurately.I am a student for Packet Tracer, recently I found some problems in TCP connection. The 4-way handshake became a 3-way handshake, and the last ACKNOWL...
Greetings to the community! Has anyone had experience on the above? All I find online are mostly SP documents which do not work well in my scenario. So a quick run through: - 4321 connected to BT services using NIM-VAB - Nat and ACL currently configu...
In VTP Server Mode, switch saves VLAN configuration information in a file named vlan.dat in Flash Memory. In VTP Transparent Mode, switch saves VLAN configuration information in a file named vlan.dat in NVRAM. In VTP Client Mode, switch saves VLAN in...
NetFlow Export server reachable via Mgmt VRF but still not working See attachment of simple topology.So if the Solarwinds or whatever application you are sending NetFlow stats from a router is reachable via the router's Mgmt Int vrf which is assigned...
i All, In my network we have OSPF between the routers. All are in area 0. From couple of days we are seeing routing loops for few routers Loopback IP. Suddenly ping will drop to destination router loopback IP (10.10.10.10). When i do traceroute to th...
Hey guys! I have a test environment with 2 internet connections. Using those two internet connections and vrf's I'm able to establish DMVPN tunnels to our HQ and DR data centers successfully. On the Hub, as soon as the Tunnel1 on the spoke comes up a...
I know Cisco doc says "Management Interface--NetFlow data export is not supported through the Management Interface port."What if the NetFlow collector is only reachable via the managment vrf or port? You must establish reachability via a different p...
HelloAs I am mostly on this forum ive decided to post here - Is anyone able to establish a FHRP session on NX-OSv7k in virl, even though cisco suggests its supported I cannot get it to work.(NX-OSv9k and IOSv does work)- I know its late in the day n...
Resolved! Cisco 2801 no ip dhcp use vrf connected
I have this issue also but when i get to this code encapsulation dot1Q 10 i can not go furtherc(config-subif)#encapsulation.1Q 10^% Invalid input detected at '^' marker.i have tried as spelt in original post still comes to this.i have tried the respo...
Could you please explain How RTP actually works in EIGRP? and when Conditional Receive flag Set, and Why?
