BGP Configuration Screen mussing on ASA 5508-X

[sawinsabaru]

Hi everyone,

I have an ASA 5508-X with ASA 9.12(4) and ASDM 7.9(2).

I needed to configure BGP for a VPN with Azure but in ASDM there is no BGP inside Device Setup / Routing or Inside Monitoring / Routing

I configured and tested BGP using commands and it works well but I'm puzzled about why these screens are not showing in ASDM, they were supposedly added way back in ASA 9.2 and ASDM 7.3 as per the release notes...

I also checked requirements and my ASA is in router mode and BGP should be included in the base license.

Any idea?

[MHM Cisco World]

In routing tab in asdm there is no bgp?

MHM

[Ruben Cocheno]

@sawinsabaru 

Perhaps a glitch on the current ASDM and the ASA release that you using.Upgrade your ASDM to 7.13(1.101) as per Cisco ASA/ASDM Matrix, and try again. 

BGP on the CLI is also an option.

https://www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asamatrx.html#id_59423

https://www.cisco.com/c/en/us/td/docs/security/asa/asa912/configuration/general/asa-912-general-config/route-bgp.html#ID-2100-00000c73