Setting dsl noise-margin with Cisco 886VA

[MaseBarnes]

Hi,

I've bought a new Cisco 886VA and want to set the noise-margin value.

With my old 876 I had to set "service internal" and then I was able to configure the value unter ATM inter config.

But with the new 886VA I can't find a way to configure it.

Any ideas?

Thanks

MB

[paolo bevilacqua]

Why do you want to do that ?

The product does not work satisfactorly ?

[MaseBarnes]

Dear Paolo,

I want to throttle the connection from 6000 to 3000, because the uplink is very unstable with poor quality.

I know I can call my ISP to change the profile, but for testing purpose I'd like to do it on my own.

[paolo bevilacqua]

The VA series have a different chipset that works differently from the old.

You better ask the ISP to provide a stable circuit.

[MaseBarnes]

I want to test some things quick and dirty, contacting the ISP would be way to long if something fails.

I've an open case @ TAC for this issue, perhaps they can help me out

Thanks!

[paolo bevilacqua]

I think matter is that if the negotiated speed proves to be unstable, there is an issue with the product, not lack of a command.

Because ADSL is supposed to never negotiate a speed that then won't work.