-- The SPA Phones and ATAs support mutual SSL authentication [SSLVerifyClient require] based on certificates signed by Cisco.
This document describes the certificate signing (CSR) process, what to do, where to run commands, and what information you must provide. -----------------------------------------------------
You must generate a Certificate Signing Request (CSR) as part of the certificate signing process.
The CSR identifies and describes your organization.
Your web server needs a private key in order to generate a CSR. This document helps you create a private key on the web server in step A1.
This private key is private to you and your web server. Do not share it with anyone! Do not include your private key in your CSR email request in step B1.
When generating the CSR in step A2, you will be asked for a "CN" (Common Name, also sometimes called "your name" depending on the operating system on your web server) This name is used to uniquely identify the web server so the name must use fully qualified domain name (FQDN) syntax.
During the SSL authentication handshake, the SPA device will verify that the certificate it receives, is indeed from the machine who presents it, this can only be accomplished with a FQDN.
For example, if your server's hostname is proserv and your domain is domain.com, then provserv.domain.comis the fully qualified CN to submit.
Step A: Creating the CSR ------------ Use the opensource "openssl" utility to generate a private key in step 1 and then generate your CSR. Both steps 1 and 2 must be run on the web server.
1. Generate a private key which you will use to generate the certificate signing request
webserver# openssl genrsa -out <file.key> 2048
2. Generate the CSR using the private key that you just created.
IMPORTANT: When prompted for an email address, you must provide a valid email address so Cisco can contact you if needed.
This email address will be visible in this CSR. Cisco will notprocess the CSR without a valid email address.
Step B: Preparing the Certificate to send to your sales representative ----------- 1. Compress the CSR with the zip utility to prevent email servers from truncating the CSR. [Do not include the web server's private key)
2. List the devices for which you require the certificate, for example: SPA3xx, SPA5xx, SPA9XX, WRPXXX, RTPXXX, WRTPXXX, and WAGXXX [This tells Engineering what devices to include in the combinedca.crt certificate for client authentication]
3. Email the CSR and device list to your Cisco sales representative.
Hallo,we use a SG300-28 and i can't login after an power outage. Although I use the same login as before when trying to login the webinterface it says 'Invalid user name or password..' I found the information how to reset the password, and i see the ...
I have a cisco switch (model SG300-52P), I use it to connect IP security cameras to Network Video Recorder (NVR). Some ports do not work with some cameras (especially the first ones in numbering 1 to 5). But the same cameras work fine with oth...
Hello all ,
I have problem when I try to start video jabber in safe deskphone,The video option is currently greyed out,but if I work in softphone mode in jabber ,the video is working .
I used camera of PC.I installed Jabber Desk Phone Video Services Inter...
Dear all,Maybe you face the same issue as me, here is the problem: I set some ntp servers on my switch with poll interval enable. After registering the different servers, it get the time correctly and show them as "up" and the next day, they are all "down...
I have the Cisco sg200-26 smart switch. I have this connected : Modem (port 2 on modem) to Cisco Switch from switch to computer, switch also has multiple other ethernet devices connected. I also have a Linsys Velop router als...