cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2023
Views
0
Helpful
0
Comments
Leah Davis
Contributor
Contributor

From: cubbywoods

For everyone that needs to know how to connect to CCME or UC500's together and be able to communicate via 3 or 4 digit dialing.

One thing to note. When you copy and paste be sure that the ... is translated into 3 characters. Microsoft Word turns this into a single character, which will not work in the IOS. Had to find out the hard way.

Here is the Dial Plan:

Site1 (First CCME Device)

voice translation-rule 72
rule 1 /^72\(...\)$/ /\1/

voice translation-profile site1
translate called 72

dial-peer voice 71000 voip
destination-pattern 71...
session protocol sipv2
dtmf-relay rtp-nte
codec g711ulaw
no vad
session target ipv4:WAN address of Site2

dial-peer voice 72000 voip
incoming called-number 72...
session protocol sipv2
dtmf-relay rtp-nte
codec g711ulaw
no vad
translation-profile incoming site1

Site2 ( Second CCME Device )

voice translation-rule 71
rule 1 /^71\(...\)$/ /\1/

voice translation-profile site2
translate called 71

dial-peer voice 72000 voip
destination-pattern 72...
session protocol sipv2
dtmf-relay rtp-nte
codec g711ulaw
no vad
session target ipv4:WAN address of site1

dial-peer voice 71000 voip
incoming called-number 71...
session protocol sipv2
dtmf-relay rtp-nte
codec g711ulaw
no vad
translation-profile incoming site2

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers