cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Alberto Montilla
Cisco Employee
Cisco Employee

Tested   by: David Liao, Cisco

UC320W    FW release: 2.0.5(3)

  • Provider:   Generic SIP Provider

  • Description: Qwest
  • Proxy: 67.148.32.xx (as indicated by the ITSP)
  • Registration:  Uncheck (peer-to-peer SIP trunk, no registration   required)
  • Outbound    Proxy: n/a
  • Call    Capacity: <As   indicated by the ITSP in your   contract>
  • Prefix   # w/"+1" : Check (uses US international numbering   plan)
  • Company   Name:  <Your company   name> (this will  appear  as the  Display Name field on SIP   messaging)
  • Account   ID:  <The  main DID  number given by the ITSP   (e.g.  408556yyyy)>
  • SIP     domain  name: <Your company local domain name> Optional
  • Authentication ID: n/a
  • Password:    n/a
  • SRV    Recorded   Lookup: Uncheck
  • SRV   Auto   Prefix:  Uncheck
  • NAT   Mapping: Uncheck (ITSP provides SBC/Outbound proxy)

    

          Systemwide parameters

  • Codec: G711u
  • Outbound FAX:  Both PassThrough and T.38 are supported

     Other requirements

  • WAN    network: Must use static IP address and fill in all information    (default gateway and DNS)

Known Issues:

     * No ringback tone  while call in transfering process.

     * Transfer at alerting failed. Transfer  at answer work.

     * PSTN phone did not disconnectwhen  extension phone init disconnection.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: