Switches - Small Business

Hi folksI currently have a network for a client that needs re design. the customer are currently using unmanaged Netgear switches. their current network topology consists of two leased lines both being routed by two cisco routers (1 1800 & 1 800). th...

Hi,does the SG300-10 Switch support SNMP write access e.g. from a central management tool? If yes, which management tool wouldbe recommended.Regards,Richard

We have a switch stack with 4 switches (SGE2000 and SGE2000P) and we are seeing the log messages below filling up the logs. Can one of the Linksys engineers please provide a definition of the %IPFFT-W-SFFTREDYELLOW log message?We have not seen this m...

Hello,I have a ESW 540 48 port gigiabit switch.  We have had it a year and a half.  In the past year it has experienced this cycle of problems:After a reset, within a week the fans are on full blast. Within less than a month the webgui is gone - not ...

under maintenance, file management, copy configuration file, via http, then backup, click on proceed, then save.  IE cannot download stupcfg.ber from IP address.  Has anyone experienced this problem?  This is occurring using different versions of sof...

I cannot get an SGE2000 managed network switch to save any config changes that i make.  I have tried upgrading the firmware.  I have tried to save changes from both the webview and the serial / telnet connections. Any suggestions?

I'll try to make this simple:I setup my DHCP server in the switch then added the VLAN that I want to forward for.Running Wireshark on my server:I can see the DHCP Discover from the foreign VLAN coming from the swtich.My DHCP server responds with a DH...

I just got the SG 300-28 28 port switch tonight and got it up and running however, i've encountered a problem regarding jumbo frames. In the documentation and product brochures, it states the SG 300 switches supports jumbo frames up to 10k. When I fi...

I have a SLM224P switch but none of the 12 PoE ports is working.I can connect ethernet devices without problem, but power is not send to PoE Injector.Here is a screenshot of the settings of one port:Any suggsetions on how to make PoE work?

Hi. I've just received an SG 300 and am in the process of tuning the configuration. We have a couple of compute servers that have been behind a PIX 515e that we would like to move over to the SG 300. Is there a way to enable / configure the SG 300 to...

HiI've recently inhierited a network which relies on a couple of SGE2000 network which has multiple vlans configured, unfortunatley i am unable to get to the management ip of the device to look at the config. I have put in a serial cable it see that ...

Hi Team,Looking that either the rack mount kit for ESW500 is orderable as a spare. I'm not sure if the one for UC520 can fit the ESW500s ACS-UC500RM-19=https://supportforums.cisco.com/docs/DOC-9698Best Regards,Sohaib

Hello,I recently noticed that, with the username admin, the web interface of the SRW2048 allows any password to be able to logon.Is anyone else experiencing this issue?Thanks,Matt

We have a client that want to design a new network with fiber optic infrastructure, with star topology, from 1 site to 5 IDF´s, at each IDF use a SRW224G4 switchwith GBIC MGBLH1, which kind of fiber opticswitch do you recommend to use at the site?

Hi,I have a SRW224G4 data switch and was wondering if anyone could tell me what the URL string would be that I can put into a script to disable and enable a port.I am guessing it would be something like:http://192.168.1.1/admin.html/setport?portnumbe...