Switches - Small Business

We have a client that want to design a new network with fiber optic infrastructure, with star topology, from 1 site to 5 IDF´s, at each IDF use a SRW224G4 switchwith GBIC MGBLH1, which kind of fiber opticswitch do you recommend to use at the site?

Hi,I have a SRW224G4 data switch and was wondering if anyone could tell me what the URL string would be that I can put into a script to disable and enable a port.I am guessing it would be something like:http://192.168.1.1/admin.html/setport?portnumbe...

I am looking for list of SNMP traps, Syslog messages (OIDs) recommended for Fault and performance monitoring of ESW switches. It will great if you can help me on this.

We are trying to configure Ether Channels on our ESW 540 switches. We have configured the port(s) and made the physical connections but the Ether channel is only showing up at 1000M. It is my understanding that the port should be displaying at 2000M ...

Hi,I have a VDSL2 connection from my ISP, with IPTV. I have a STB (set-top box) connected to a Cisco SLM2008, and this is connected to my VDSL2-router. The SLM2008 is set up with port-mirroring on the port between the SLM2008 and the VDSL2-router, in...

Decided we'd give the Cisco 300 series switches a try and seewhat we think about them compared to our Cisco Catalyst 2960 switches.I'm already stumped on setting up VLAN trunking between 4 switches. Do I have to manually setup all the VLAN's on each ...

Hi there,we're trying to setup a VLAN trunk between a new SG300-28P and an existing SRW2024P (Linksys/Cisco)both ports are set to trunkboth ports have VLAN 1, untagged and VLAN 2 taggedVLAN 2 exists on both switchesthe link works if we put an 8 port ...

I have many SRW224g4p switchs,and I use a catalyst 3560  for a core switch.The SRW224g4p uplink to 3560 switchWhat can I config the port of the 3560 to SRW224g4p(Their are many of vlans in my network)and config the port of SRW224g4p to 3560's portps:...

Hello,I'm trying to configure a Ether-channel between SRW2024 and a cisco Catalyst 4507 to be a trunk, and let to traverse the trunk one tagged vlan (504) and one untagged vlan (1). I can configure the trunk (without ether-channel) and it works perfe...

Hello,  I am looking for some help with my sfe1000p.  It will be used to give 4 phones PoE and VoIP as well as give internet access to computers (the phones have an output to the computer).  I have the basics down but I cannot seem to figure out how ...

Has anyone trouble to get Linksys SLM2008 Managed and Linksys SD2008 Unmanaged to Work together? SD2008 LED Light is continously flashing at connected Port.

I have a new SG100-24 Port Gigabyte unmanaged switch.  Recently some of the ports on the switch started acting up and we lost connectivty on several ports.  Called Cisco TAC and they sent me a new one, same issues on the replacement on several of the...