Switches - Small Business

I can't find any information about SPAN support on SX550X-12F (or generally SX550X) switches. How many SPAN sessions are supported?Thanks for your advice, Jan

Hello everyone,I have a Catalyst 3750 that we use as our core switch, we additionally have 3 other switches on our infrastructure.It's been quite a while since I use the command show processes cpu, I get high % usage on core 3 of this switch.We use Z...

Hi everyone, I am trying to create a vlan mapping tunnel on a cisco sg350 switch, and I cant seem to figure out the full configuration.From the documentation about the configuration,https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-350-se...

Hello,I've a 2 SG500XG-24F in a stack.I would like to upgrade it (from 2.3.5.63 to 2.5.0.90) without disrupting my network (all devices are connected twice, using LACP, to the stack).Is it possible to reboot one unit at a time so at least one is ALWA...

Hi, What power supply is minimum needed for RPS2300 for powering one Cisco 550x-48P (370W)?  Is 750W ok? Can this power 2 550x switches  If we go instead with one 1050W power supply , can it power 4 550x

Hello Everyone, I have some questions about Cisco SG200 series and  VLAN for DATA/VOICE.  I only manage the DATA, there is another guy for the VOICE equipments.  Contexte : Network Equipements : 2 Cisco SG200 seriesVoice Equipements:  VoIp Phone, PBX...

hi,i have a problem with a Cisco SF302-08PP it't don't give the power to the AP, any one can help

I just came into a situation with a few SG300 switches already in use. As part of making the networks work together, I turned on Option 82 and it does not behave as I would expect it to do. Specifically, the Remote ID is the same for everything conne...

Dear all,I just received a 350x-24. The fan is quite loud, but that isn't a problem as no one sits beside the rack.I just wondered if a noise of 49.2dB average is normal or if it is a indiaction for a hardware or config problem?The noise level was ju...

Greetings to all,Does cisco 220 smart switches support ring topology connectivity.Can we connect 7 220 switches in ring topology with end of ring being connected to core 350x switch

Hi, I would need some assistance/help with my issue. Like my topic mentioned, I am not able to get internet access and I am not quite sure why. First my setup: Router -LAN network 172.16.1.0/25Router LAN IP address port: 172.16.1.1/25Static route cur...

Following the process documented in the SG300 manual - When I select the firmware source file - Select File sx300_fw-14088.ros (I just downloaded from the Cisco website)  -  I receive the following error - Copy: Illegal software format.  What is the ...

is there a command scheduler for SG300 or SG500 series?