I have a question about best practice to priotize voice packets on the LAN side.
We have everything configured on the firewall/edge device for voice prioritization, however I am unsure of the exact steps to take on the LAN side to make sure that traffic within the LAN will not affect voice quality.
Our setups a very basic: vlan 1 (default) for data, and vlan 100 (voice) - The ports are configured as General (1untagged, 10tagged).
At this point the phones are manually set with a vlan, but form reading these forums I see I can accomplish this by setting up LLDP and having it automatically assigned the vlan instead of manually setting this,
My main concern, however as stated above, is QoS.
Does anyone have a best practice or some advice on how to setup QoS specifically for voice.
I found this pdf, however I was unsure where they came up with the CIR and CBS values.
This is my first post to the forums; thanks in advance for any help provided.