Cisco SF302-08PP + Vivotek SD8362E

[spanos001]

Hello,

i have a problem with Cisco switch SF302-08pp.

I try to connect my ip camera Vivotek SD8362E (PoE+) but it doesn't power on at all.

If i try the camera to another PoE switch it works fine.

I tried to change settings on PoE Port setting, but without any luck.

Is there any compatibility issue?

[mcselltor]

Hello,

the switch has a PoE+ budget of 62W. Are there other PoE(+) clients connected?

Maybe the PoE budget for the switch is already reached.

Torsten

[spanos001]

I tried to disconnect all other PoE devices (3 of them PoE not PoE+) but still Vivotek cam is not power up.

[mcselltor]

Please check the PoE port settings like

- Port Limit

- Class Power Limit

Is this switch connect to another PoE-switch? It is possible that the switch is powered by another switch due to false detection. To prevent this, PoE should be disabled on uplink ports.

Please have a look at Port Management > PoE > Properties and check the displayed counters.

[spanos001]

I disconnected all utp's from switch and left only the Vivotek cam but still no power.

Switch is powered from it's own power supply.

I changed poe port limit to maximum but still nothing.