make 250 unmanaged?

[Tom Holck]

How can I do my cisco 250 unmanaged?

(Cisco Business 250 Series 250-48T-4G Switch 4)

I have an issue to test.

a software program, can't go trough the switch out, it blocks? If bypassing the switch direct to the router it works.

[Flavio Miranda]

@Tom Holck 

 You dont need to make the device unmanaged. Unmanaged meains you can not access the switch to change the config. If you are connecting the CBS250 to a router, you need to prepare both devices to co-exist.

 The simple way to work with this scnario is access the switch and make sure all the interfaces you are using is on the same vlan.

https://www.youtube.com/watch?v=hzwnXYw4Tss

[Tom Holck]

Thanks Flavio, I'll try 

Tom