I have a new stack unit that looks to be having some issues with PoE.
On one of the ports, I can see the following error message:
"ESG-ST9#show power inline GigabitEthernet1/0/1
Interface Admin Oper Power (W) Class Device Priority
---------- ---------- ----------- ----------------- ----- -------------- --------
gi1/0/1 Auto Fault 0.0 - low
Port Status: Port is off. Voltage injection into the port
Port standard: 60WPOE
Admin power limit: 30.0 watts"
On other ports on the unit, the following error message is showing:
"ESG-ST9#show power inline GigabitEthernet1/0/4
Interface Admin Oper Power (W) Class Device Priority
---------- ---------- ----------- ----------------- ----- -------------- --------
gi1/0/4 Auto Fault 0.0 - low
Port Status: Port is off. Discharged load
Port standard: 60WPOE"
The switch is currently on FW version - Version: 2.5.9.15
Thanks
