cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
595
Views
2
Helpful
9
Replies

Am unable login cisco catalyst9200L via GUI but able to access via CLI

jdurgam
Level 1
Level 1

Am unable login cisco catalyst9200L via GUI but able to access via CLI

showing the below error on the browser.

 

and showing below attached error could you please help regarding the below error.

1 Accepted Solution

Accepted Solutions

Hi,

Can you please configure "no ip http secure-client-auth" and check again.

Best regards,

Antonin

View solution in original post

9 Replies 9

@jdurgam 

Try http:// instead https://

Or enable HTTPS using the command  "

ip http secure-server

HI Flavio Miranda,

Thank you for your information still unable to access via https:// also

I notice in the OP the error is "no required SSL certificate was sent" So I believe that the suggestion from @Flavio Miranda to use http rather than https is a good suggestion.

If you would really prefer to use https, then the question becomes why the device you are using to access the Cisco is not sending SSL certificate info.

HTH

Rick

I tried with the http:// also not working 

 

and could you suggest me how the SSL certificate should sent.

balaji.bandi
Hall of Fame
Hall of Fame

Can you post the configuration from CLI, also let us know what IOS XE code running

show version

show run | in http

or confgure as below

BBSW(config)# username admin privilege 15 secret mypassword
BBSW(config)# ip http server BBSW(config)# ip http secure-server BBSW(config)# ip http authentication local

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hi Balaji.bandi,

find below config of my sw.

HYD-TBAL-P1SA10H1-SW3#sh ver
HYD-TBAL-P1SA10H1-SW3#sh version
Cisco IOS XE Software, Version 17.14.01
Cisco IOS Software [Dublin], Catalyst L3 Switch Software (CAT9K_LITE_IOSXE), Version 17.14.1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2024 by Cisco Systems, Inc.
Compiled Fri 05-Apr-24 00:12 by mcpre


Cisco IOS-XE software, Copyright (c) 2005-2024 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.


ROM: IOS-XE ROMMON
BOOTLDR: System Bootstrap, Version 17.12.1r [FC3], RELEASE SOFTWARE (P)

HYD-TBAL-P1SA10H1-SW3 uptime is 2 hours, 5 minutes
Uptime for this control processor is 2 hours, 7 minutes
System returned to ROM by Reload Command
System image file is "flash:packages.conf"
Last reload reason: Reload Command

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.


Technology Package License Information:

------------------------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------------
network-essentials Smart License network-essentials
dna-essentials Subscription Smart License dna-essentials


Smart Licensing Status: Smart Licensing Using Policy

cisco C9200L-48T-4X (ARM64) processor with 502559K/3071K bytes of memory.
Processor board ID JAE26151DGU
2 Virtual Ethernet interfaces
48 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
1970780K bytes of physical memory.
819200K bytes of Crash Files at crashinfo:.
1941504K bytes of Flash at flash:.

Base Ethernet MAC Address : 04:bd:97:65:38:00
Motherboard Assembly Number : 73-102066-04
Motherboard Serial Number : JAE26151DGU
Model Revision Number : D0
Motherboard Revision Number : A0
Model Number : C9200L-48T-4X
System Serial Number : JAE26151DGU
CLEI Code Number : INM6H00ARB


Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 52 C9200L-48T-4X 17.14.01 CAT9K_LITE_IOSXE INSTALL


Configuration register is 0x102

HYD-TBAL-P1SA10H1-SW3# show run | in http
ip http server
ip http authentication local
ip http secure-server
ip http secure-client-auth
HYD-TBAL-P1SA10H1-SW3#

Hi,

Can you please configure "no ip http secure-client-auth" and check again.

Best regards,

Antonin

This issue solve?

MHM

No still facing the same.

Review Cisco Networking for a $25 gift card