Hello,I use 9200 switches in my environment and am interested in obtaining the power draw of certain PoE devices on specific interfaces. What is the OID to use for that?
Forum Posts
Resolved! End Of Life
When is the EOL of Cisco C9200L-24T-4G?
Hi All,I am installing a new Nexus VPC switch that uplinks from my core router. It will aggregate handoffs from a Bundle-ether interface. Currently the Nexus switch has different access ports that take untagged or trunked traffic based on different V...
Does anyone know where i can find information on the NDAA/TAA Compliance of these:Cisco Business S350-24T-4G-NACisco GLC-LH-SMD 1000BASE-LX/LH SFPCisco Catalyst IE3200 SwitchCisco Industrial Power PWR-IE50W-ACI am trying to find documentation, since ...
Resolved! Reset 9200L password
Hello,How to reset the 9200 L passwordRegards
On the Cisco Support Tools Catalog page (https://www.cisco.com/c/en/us/support/web/tools-catalog.html), the link for the Power Calculator (https://cpc.cloudapps.cisco.com/cpc/) does not work. It returns an HTTP ERROR 400.Any other way to get this? - ...
Hello, i use a catalyst 2960 series POE-24 and it's connected to a 650va UPS, but noticed that anytime light goes off the internet connection cuts off, mind you there's a ups connected to it and it doesn't go off; i have access points connected to th...
Hello!According to https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdfGeneral Recommendation: ● Activate vPC peer-switch in a vPC environmentvPC peer-switch can be used in a vPC domai...
Need to know APINIC Pool Configuration for Cisco 9300 Switches
Good evening all, I am experiencing packet drops error in my network when any VC runs. I want to configure QOS in my cisco switches like as catalyst 2960 S, 2960X, 9300, 9500, etc. Help me to configure qos in mentioned devi...
Dear all,We have a Linux Radius server and in it we have two users for now for testing, user.admin and user.support, and we have two groups of users, g_admin and g_user, and in the switch I put the config below, but who is only released in g_user is ...
I need the following table of information for the IE-3100-18T2C-E switch:All open ports, the networking protocol used on them, the application protocol, the use of the port, whether it is internally exposed or externally exposed, any other notes. Por...
Hello Do you know where it is possible to find heat dissipation for the following equipment? NCS-57C1 NCS-57C3 N540X-ACC-SYS N540-24Q2C2DD-SYS
I have C9606 Switch. configure the VTP version 2 VTP domain Configure with password. and i want to see the password, and run the command Show vtp pasword but password is not showing. so how to see the c9606R Which password configure
Hi, I have a Catalyst 9300 That i configured the MSTP Root brisge to zero as main switch and other switchs from other brands ( less then 20 switchs) have only RSTP on their configuration and all defaults bridge value 32768.When i close the ring all u...
