9200 switch, the first eight ports cannot be used, unable to obtain IP address, the rear ports are normal, resetting the switch is invalid, to solve it?
Forum Posts
Kindly help to confirm What is EOL & EOS date for WS-C3850-48T-S this model
Dear Everyone,Want to ask if I can do hot swap or remove a 10G network module on an operating Cisco Cat 9300.If possible, need to relocate the unused network module that is in a production environment to another deployment.Thank you and best regards,
Config on existing Cat65 VSS (to be replaced with Cat96): vlan 304remote-span!vlan 306remote-span monitor session 1 destination interface Gi1/3/12monitor session 1 destination interface Gi2/3/12monitor session 1 source remote vlan 304 monitor session...
Resolved! I got a used Cisco Catalyst 2960-CX
I got this used Cisco Catalyst 2960-CX I've can't get into it as it's locked by an account that I was never given the username or password to it and I've tried to reset it but it doesn't seem to be resetting at all I'm not sure it because I'm doing i...
Hello,I cannot ping the switch nor reach an ip destination from within it. My switch is on v3.4.0.17. pfSense manages my firewall and DHCP server. My default gateway is 172.25.1.1. I have 3 VLANs 10, 20, 30 - subnets 172.25.10.1, 172.25.20.1, etc.My ...
Resolved! Monitor Session VLAN Limitation?
I am trying to add the following but it seems that I can not add over 5 entries. Is there a limitation as to how many you can add? I cannot do a range for all of the VLANS as I am setting this up for our IPS to monitor and there are Voice VLANs in ...
Good afternoon all, Previously I was using ios xe 17.03 version in cisco catalyst 9500 and before some time I am facing an issue related to %PLATFORM_MATM-4-QUEUE_OVERLIMIT: MATM dropped learn cache batch messages as queue...
9200 switch, shouw startup-config has stored config, show run after reboot is not available, config-register 0x210 this command is not usable
NAS HA is connected to a SWV pair (C9500H => IOS-XE 17) Lets say Port 1/0/1 and Port 2/0/1. HA fails as CCM messages are not forwarded between the ports. NAS Maintenance Domain Level is 0 and all data ports connected to one Vlan. Based on my current ...
We have an issue since a long time upgrading the software of a Catalyst 9300 Switch. We are currently running 17.03.04 and wanted back then to 17.09.05 and right now to 17.12.04. The Problem, there is a virtualization machine connected with multiple ...
Hi,so i've bought a c1300 to test the functionalities I need and I run into some problems.I have a a access point on port 16 with 2 radios for vlan 1 Clients and vlan 4 guests. On my old Cisco and Dell Switches I made an Ip helper-adress on the vlan ...
Good morning,We have an Ethernet ring using an IE3010 and 4 x IE3000 switches configured with REP.All the links are microwave radio connections.Two of the switches lose connectivity and report the following error:"005563: May 10 00:37:20.898: %REP-4-...
We currently have our Cisco equipment synced to our NTP server using MD5 authentication, which works well. We have a directive from our cybersecurity team to upgrade to one of the SHA authentication mechanisms and facing a problem with that.Now, both...
Hello, I have an IoT server configured on one of my packet tracer files, and for some reason when I try to create conditions at my IoT Registration server I click "OK" but the condition I made doesn't show up in front of me, as if it is invisible. Ca...
