Hello,
I think I might an issue with SNR/RSRQ. Based on what I know from my radio days different equipment can have different thresholds, but their are standards that are good practices. For this particular router I am trying to find Cisco specific documentation that would show the tolerance levels. Only thing I have found so far is RSSI which doesn't tell me as much as the actual quality. Posted output below. Thanks in advance.
#show cellular 0/1/0 radio
Radio power mode = online
LTE Rx Channel Number = 1125
LTE Tx Channel Number = 19125
LTE Band = 2
LTE Bandwidth = 15 MHz
Current RSSI = -34 dBm
Current RSRP = -69 dBm
Current RSRQ = -15 dB
Current SNR = -2.3 dB
Physical Cell Id = 175
Number of nearby cells = 2
Idx PCI (Physical Cell Id)
--------------------------------
1 175
2 308
Radio Access Technology(RAT) Preference = AUTO
Radio Access Technology(RAT) Selected = LTE
