cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
117
Views
0
Helpful
2
Replies

N7K replacement

Redbeanie
Level 1
Level 1

Hi

We are looking for recommendations for replacing our existing N7K.

Is someone able to guide us in the right direction...

This is the current build:

Mod  Ports  Module-Type                         Model              Status

---  -----  ----------------------------------- ------------------ ----------

1    48     1/10 Gbps BASE-T Ethernet Module    N7K-F248XT-25E     ok

2    48     1/10 Gbps BASE-T Ethernet Module    N7K-F248XT-25E     ok

3    48     1/10 Gbps BASE-T Ethernet Module    N7K-F248XT-25E     ok

4    48     1/10 Gbps BASE-T Ethernet Module    N7K-F248XT-25E     ok

5    0      Supervisor Module-2                 N7K-SUP2E          active *

6    0      Supervisor Module-2                 N7K-SUP2E          ha-standby

7    48     1/10 Gbps Ethernet Module           N7K-F248XP-25E     ok

 

Many thanks

 

2 Replies 2

marce1000
VIP
VIP

 

       - FYI : https://www.cisco.com/c/en/us/products/switches/switch-selector.html?guide=data_center|lantype|lanupgrade|nexus_7000#~select-switch
                      Scroll down too!

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

The 9400 should be a good replacement for the 7K, since you only need Ethernet modules. See datasheet:

https://www.cisco.com/site/us/en/products/networking/switches/catalyst-9400-series-switches/index.html

HTH

Review Cisco Networking for a $25 gift card