Set temperature thresholds on C3850 ?

[johnsmunoz]

I'm currently have several WS-C3850-24T, 16.12.08 (CAT3K_CAA-UNIVERSALK9)

I'm monitoring with Observium and it's showing that the current temperature value is beyond the "Min Warn" value.

This value is being read from the devices.  (if I manually change them in the software they re-poll and return)

It appears that it's pulling the min value from OID 1.3.6.1.4.9.9.91.1.2.1.1.4 row 1012.3

Does anyone know where I can change that min warn value?  It's not appearing in the environment status.

6301-stage2-sw1#show environment temperature status
Inlet Temperature Value: 28 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 46 Degree Celsius
Red Threshold : 56 Degree Celsius

Hotspot Temperature Value: 42 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 105 Degree Celsius
Red Threshold : 125 Degree Celsius

[marce1000]

                  - You can't change temperature thresholds on the device , 

 M.

[KishoreBraj]

Yes, we can change the default yellow threshold temperature using below command:

sw(config)#system environment temperature threshold yellow X

where X is Delta value from Red threshold in Degree Celsius