WLC Config Issues

[up2014497]

Hi I am having trouble configuring my WLC. This probably is something trivial. I have put the WLAN on my management network VLAN 10 (10.1.0.0/20). Its IP address is 10.1.0.5/20 and the Core1 IP address is 10.1.0.1/20 . The link connected to the WLC is a trunk link. Not sure why I am unable to ping or connect to the WLC. I hope the images are sufficient. Thanks

[Martin L]

I think we had similar issue here last year; something with management vlan 1 or 0; please zip your PT file and add it here

Regards, ML
**Please Rate All Helpful Responses **

[up2014497]

Here is the file thank you

[Martin L · Accepted solution]

Add switchport trunk native vlan 10 to switch ports GigabitEthernet1/0/1 and GigabitEthernet1/0/24 on L3 switch to get ping OK (PC to WLC)

In terms of GUI access to WLC, if u di not see web access, u may want to try different WLC model in PT

Regards, ML
**Please Rate All Helpful Responses **