Tag: "fxs" in "Collaboration Knowledge Base" - Cisco Community

Latest Tagged

How to understand and configure analog FXO or FXS - ( ‎06-22-2009 03:42 PM )

by on Latest post on by

2 Comments 70374 Views

2 Comments

70374 Views

How to add a second Cisco ATA FXS port to Cisco CallManager - ( ‎06-22-2009 06:16 PM )

by on

0 Comments 2584 Views

0 Comments

2584 Views

The FXS ports on the VG224 Voice Gateway do not go off-hook, which results in a fast busy tone - ( ‎06-22-2009 06:16 PM )

by on

0 Comments 5165 Views

0 Comments

5165 Views

What are the recommended guidelines when installing FXS Analog Voice Port lines using the VG248 gate... - ( ‎06-22-2009 06:17 PM )

by on

0 Comments 1559 Views

0 Comments

1559 Views

How to enable PCM Capture on ISR Voice GW - ( ‎11-23-2010 08:12 AM )

by on Latest post on by

2 Comments 27691 Views

2 Comments

27691 Views

How to disable FXS port 2 on 18x ATA? - ( ‎06-15-2011 08:55 PM )

by on Latest post on by

2 Comments 3282 Views

2 Comments

3282 Views

How to enable the Caller ID (CLID) name delivery feature on Cisco IP phones for inbound PSTN calls o... - ( ‎06-22-2009 04:40 PM )

by on

0 Comments 20699 Views

0 Comments

20699 Views

Cannot configure the Cisco VIC-4FXS/DID Analog Voice Interface Card to use DID trunk ports on a Cisc... - ( ‎06-22-2009 04:41 PM )

by on

0 Comments 2377 Views

0 Comments

2377 Views

Outbound calls fail from the IP network on IP phones registered to the Cisco CallManager Express rou... - ( ‎06-22-2009 04:41 PM )

by on

0 Comments 2177 Views

0 Comments

2177 Views

What is the default QoS behaviour of the 6608 PRI and 6624 FXS Catalyst 6000 cards? - ( ‎06-22-2009 04:43 PM )

by on

0 Comments 2310 Views

0 Comments

2310 Views

Top Tagged

Cannot make calls from an analog phone connected to the MGCP IOS gateway. A busy tone is received - ( ‎06-22-2009 06:14 PM )

by on

0 Comments 3814 Views

0 Comments

3814 Views

How to configure DID passthru as DTMF to Fax Server when an ATA is used - ( ‎06-22-2009 06:10 PM )

by on

0 Comments 1593 Views

0 Comments

1593 Views

Analog FXS and FXO hardware support on Cisco 175x platforms - ( ‎06-22-2009 06:09 PM )

by on

0 Comments 3625 Views

0 Comments

3625 Views

How to configure the VIC-4FXS/DID card on a Cisco 1751 and 1760 router - ( ‎06-22-2009 03:38 PM )

by on

0 Comments 3451 Views

0 Comments

3451 Views

In CallManager, the analog FXO and FXS card is not recognized by the gateway - ( ‎06-22-2009 03:38 PM )

by on

0 Comments 3360 Views

0 Comments

3360 Views

Calling party number cannot be passed to the PSTN or PBX or it is incorrectly received by the destin... - ( ‎06-22-2009 05:29 PM )

by on

0 Comments 2082 Views

0 Comments

2082 Views

Users cannot configure the PRI-group and "% No DSP resources available to configure pri-group on con... - ( ‎06-22-2009 03:33 PM )

by on

0 Comments 3729 Views

0 Comments

3729 Views

The number of DSPs consumed by a Cisco 3825 Series Integrated Services Router with two T1 PRIs and e... - ( ‎06-22-2009 03:32 PM )

by on

0 Comments 2818 Views

0 Comments

2818 Views

Analog FXS and FXO hardware support on MC 3810 multiservice access concentrator - ( ‎06-22-2009 03:32 PM )

by on

0 Comments 1353 Views

0 Comments

1353 Views

In CallManager the FXO card does not send or pulse out digits - ( ‎06-18-2009 04:00 PM )

by on

0 Comments 3738 Views

0 Comments

3738 Views

Top Taggers

User

Count