TelePresence and Video Infrastructure

Have to do an Network Path Assessment for a client with different locations globally. When I did the TelePresence course it was put to us we use a 'stick' which we use at different locations, but in all fairness this seems hit and miss regards the lo...

I have dual UCM servers (ver:7.1.3) we are having an issue with some phones rings at least fifteen time but the outside callers only hear 31/2 rings. I want to change the global ringing at the phone to 31/2 or 4 rings. Just like what the caller hears...

we are using two 9971 phones, both have the cameras enabled, and the preview video button works, but we do not get video on any calls.camera has been enabled in the Enterprise Phone parameter.CUCM 7.1.5.1so, we should be fine for service pack level. ...

One of our AMX Programmer asked if he can write a code to schedule a Tandberg TMS/MCU standard meeting as a button on AMX control Program. Please let me know if it can be done.

I have a problem regarding calls to GSM Modems (9600baud) via a Cisco Voice Gateway.ATA186 ------SCCP-----CUCM 7.1.3b ------H.323------IOS Gateway 2811------ISDN/BRI/PRI-------PSTNorVG224 ------SCCP-----CUCM 7.1.3b ------H.323------IOS Gateway 2811--...

Hi,I just installed the CTS-Manager 1.7. When i logged in with the sysadmin user (10.89.132.147 admin/pdihd123), i do not see the configure> application settings menu option. The license file is as following: Feature-Based Licenses  NameStatus LIC-CT...

Hello,Implemented Cisco Phones for the company about a year ago. Having a problem now where guys in the shop cannot hear them ringing, because of the noise of shop life(grinder, air compressor, ect..). Anyway, i was wondering if they made an external...

We have VG248s configured but there have been many issues where the port will die or stop working(as in no dial tone). There are also EOL now. I wanted to know if I can get a VG224 which has less ports but not EOL.What advantages does the VG224 have ...

Dear All,I am deploying a Video conferencing solution. I have 5 sony VC units and one CISCO 2811  with Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9_IVS_LI-M), Version 12.4(24)T3 with 1 PRI line and DID range of 20 number out 20 numbers ...

Hi everyone,I try to make my 9971 work in a video call.I have CUCM 7.1.3.32900-4, DevicePack 7.1.3.32010-1 and firmware 9.0(2).I enabled Cisco Camera on the Enterprise Phone Configuration page with Override Common Settings but I can't even get one-wa...

The gatekeeper configured one local zone and one remote zone. We will use gatekeeper bandwidth CAC for controlling the number of calls from local zone to remote zone.In this case, which bandwidth command I should use. Bandwidth remote or bandwidth in...

does the ISR 3900 Gen 2 router has any video over ip features or advantages over the 2900 ? i have an overseas branch connected to my centralized CUCM via a leased line  with a number of phones and 1  telepresesnce end point , im not sure whether to ...