TelePresence and Video Infrastructure

Hi,What happened to 6.0? I have 4.1(2) running with Exchange 2003 and am looking to upgrade. I'm a little confused about the Unity versions. I am about to read the release notes for each version but wanted to find out if anyone has experience with...

We are working on incorporating or upgrading a 3.2 cluster to 4.2. for CCM and Unity. Can we BAT the profiles User/Devices from one to the other. Also what are some of the challenges that we may encounter.

I have a remote site connecting to a secondary site using a GRE tunnel. The remote site has a second GRE tunnel to the main office. The remote site and secondary site are connected to allow VoIP traffic. I am having intermittent bandwidth issues resu...

I have media service server transmit video using ip multicast I have Cisco routers 2800 and 3350 and I am enable PIM dense mode and multicast routing also enable , I am using Cisco switch 2950 and I enable IGMP snooping .in such situation my vid...

Anyone get this to work? My VTA is working and it see's the phone but when I try a call over VPN it doesn't work, no video. The phone and PC are on the same VLAN, the PC is plugged into the phone which is plugged into a poe port on the asa5505. Vi...

I have a CCm 4.1 and a 2841 acting as a gateway. Also have a FXO card and in one of this port I have a direct line. I have configured a connection plar on this port to dial the number 9030 (that is my hunt group) and configured a voip dial-peer point...

What is the prefered backup utility to be used for CallManager 3.2

Hello,I have CUCM 6.1 integrated with MeetingPlace Express VT and everything is set up. However, when I test with trying to conference more than 2 users the video ends on everybody's desktop. When it is just 2 users the video shows up fine as soon a...

Dear Experts,i have a problem in my lab (AS4500XM with CCM5 -10.100.252.10- and SIP trunk). the problem is:when i make call from the PSTN to our internal number i can not receive any call but i can make call to the outbound ,and below you can see the...

Are there any problems with SNMP services on the Unity and CM boxes for network monitoring. We are using Orion Network Performance Monitor from Solarwinds version 8.5.1

Hello,I'm trying to setup my VT Advantage camera on my Windows XP workstation with a 7941G IP Phone. I cannot seem to get the video option to show on the phone. When I go into the menu's on the phone it says "Video Capability Enabled -NO" I have a...

Now a days quite a few Telco providers offer SIP Trunking For Cisco Call Managers to replace traditional and expenses PSTN Trunks such as PRIs etc.Some customers go with SIP Trunking for regular calls, but still rely on dedicated FXO trunks especiall...

Is there a way to call multiple cell phones with a broadcast message with Cisco Unity 5 and Call Manager 4.1.

Hi,One of my customer asked me for a CISCO based Videoconferencing system for their meeting rooms. They want that system to be CISCO specific, but currently, customer has NOT Call Manager, he has an AVAYA PBX and phone are based on Avaya. Of course,...

Hi,We are using CISCO DMS-DMM for our digtial signage solutions, as the media content(input) for the DMM will be MPEG1, 2 & MPEG4. We are developing content in the above formats for video, at this point we are facing a problem with MPEG4 format video...