TelePresence and Video Infrastructure

We have four sites connected using a ATM backbone with varying amounts of bandwidth to each site. We are currently trying to install a IP video conferencing system using 2600 routers as a gatekeeper/proxy. Is there a way to vary the bandwidth limit o...

i am using cisco 3745 router for voice router i am facing a problem after few days all calls are blocking once it restarted the problem we can rectify i am using the System image file is "flash:c3745-ipvoice-mz.124-1.1.bin"any updates of flash can r...

Has anyone succesfully configured a Cisco MCM & a PIX to work together?I have an MCM with a private IP address behind a PIX, but with a static NAT to a "real" address.I have local endpoints (private addresses) registered to the MCM and they can call ...

Hi,According to Video IP Telephony SRND,MCU can be configured as SCCP device on CCM 4.1x,in order to have CUVA video conference to outside H320 gateway, we still need configure H.320 gateway as a H323 gateway in CallManager, and then create the dummy...

Hola Forum,In first place, please sorry me if this is not the correct forum to do this kind of question, and if so I would appreciate if you can point me where to do this question.Well I was reading a couple of Cisco links and playing with router to ...

i wish to upgrade the ccm to 4.1 and before connecting all phones .i wish to test with a single phone if everything is working fine i can connect rest of the phones to the CCM.how we can do the test with the existing ip address ? kindly provide a sol...

Looking to implement a small IP/TV design. Need design recomendations. Our basic design is a TV service via DirectTV, we then split out specific channels encode/convert them to MPEG(???) and use a WAE-612 as the IP/TV "Server". All viewers will be...

A client currently has a 2600 router running IOS 11.3. He's doing video conference over the internet and it's been working well so far. He recently purchased a brand new 2811 running the advanced security IOS version 12.3.14(t7).When the 2811 is in...

Has anyone tried connecting a Tandberg 150 video phone to a CallManager 4.0 environment?We have configured one as an h.323 device.We can make audio and video phones from any IP phone TO the Tandberg150.BUT - when we try to make a call FROM the Tandbe...

I have a Tandberg MXP3000 configured as an H.323 client in CallManager 4.0.2a, I am running into some issues when calling between Cisco VTA and Tandberg MXP3000.When I initiate a call from the Tandberg MXP3000 to a Cisco VTA I can only see the extens...

I would like to connect a doorphone on my CCME system. Does Cisco have an IP doorphone? I didn't see one online, but wanted to make sure. Would I have to setup an ATA? I really need a simple installation since this is for my boss' home.Thanks,Dam...

Hi,We have recently migrated to new CallManager servers. Our Tanberg video conferencing units which previously were set up as H.323 devices now will not display on the new CCM's. On the old, the IP address showed up to show everything was working, bu...