TelePresence and Video Infrastructure

good afternoon I want to activate the option to take screenshots, but I can not find the option, I am entering the configuration through the IP webwebex,cisco room kit,

Hi can l get an assistance on this ERROR:  "ERROR: Video From Internal CameraThe internal camera is not transmitting video" that on a Cisco Spark Codec Plus - (Current version ce9.4.0.62bc0aa4505) WARNING: Camera DetectionNo cameras found.

Hi, I'm trying to install Cisco Vision Dynamic Signage Director v6.1 on a Platform 3 server (UCS 220 M4).According to this document: https://www.cisco.com/c/en/us/td/docs/Sports_Entertainment/cisco-vision/dynamic-signage-director/software/install-gui...

i have a room 55 telepresence unit which is with a multi site feature which is supposed to be set up as a standalone unit , can someone please tell me which ports through the firewall inbound and outbound im going to need to allow for  video calls? a...

 Hello, Does anyone knew what can this command below do?xcommand UserInterface WebViewThis command shows "couldn't open {{some title}}."Is this caused by network configuration or ... Recently I changed Roomkit registration method from UCM to Webex cl...

Running CMS 2.6.1. on an X3 appliance. Getting the folowing and trying to locate via putty the command to correct the version issue.BFCP receiver failed to parse 292 bytes from ::ffff:ac8:a61c:5060 (reason: 'incorrect version')Any ideas are appreciat...

Hi - We have a MX 300 G2 (ce 9.7.1 30bff6140aa) in one of our video conferencing rooms, but this seems to happen with all the devices.  When we are using video conferencing form the device and use sharing(proximity or hard wired) at the same time it ...

In our DL set up - we have two SX80 codecs connecting with a WebEx Plus codec.  We are generally connected Monday through Friday from 8 am to 5 pm.  However, in the past few weeks we have video glitching at the site with the WebEx Plus codec and then...

Hi all,I am wondering if we can make a video conferencing session from 1 codec to multiple codecs.is there any hardware or license limitations regarding that ?Thanks,                  

Within the last 48 hours we have noticed the CPU averaging about 40 to 60 percent with peaks 80 percent ... It's random but happening on them.   Configurations are mirrored.   They are registered to the VCS Control also.   The average call volume is ...

Good morning nice to met you all, I need to link 5 TelePresence in a conference (1 SX80, 3 C20 and 1 C40), but when we finally connect the last one (5th) they can listen to us but, they are unable to see us. We are using skype for bussiness and we ha...

Hi all, Has anyone ever doing an integration between room kit plus and extron? I have problem with my meeting room with AV system. some time my touch 10 can't control AV processor device in my case i used extron as an AV processor with costume in roo...