Resolved! Factory Reset
Hi there, when I do a factory reset on my Web-ex kit, be it pro, plus etc, does that wipe all sensitive data from the device?And is this info not retrievable in any way? Cheers
Hi there, when I do a factory reset on my Web-ex kit, be it pro, plus etc, does that wipe all sensitive data from the device?And is this info not retrievable in any way? Cheers
Hi all, We have a cisco sx80 with p60 camera. after upgrade firmware from CE9.4.0 to CE9.6.1 we have a problem when we make a video call selfview always be minimize. after we check a log we found log like in this : User root/peripheral about to e...
Is the Touch 10 required for all Webex Room systems to operate?
Hi , One of my client has TMS servers in the cluster behind the load balancer and deployed as active/passive. Recently, we installed TMSXE servers in a same way active/Standby ( basically primary node and secondary node) and one server is in ac...
Dear All My Customer has Probloem to connect his AMX via RS232 connection to Cisco Webex Codec pro(via COM Port Euroblock), on the AMX they allways ask for Login user/password. - SW is CE9.6.2- Registered on Call manager 11.0 Regarding Rel Note CE9.6...
Hello,I have a Cisco TelePresence Codec C40:- Software Version: TC6.3.0.3d8e7d1- HARDWARE SERIAL: B1AV50D00142 .I buy it in an State auction. Before using, I just reset everything's. Just after resetting the Cisco-CTS-CTRL-DVC8-TelePresence-Touch-8-i...
I am running CUCM 11.5 and DX70 Android registered on call mgr.I have VCS 15.9.0 also.I need to add the DX70s to VCS. What settings on CM do I need to get VCS to add the DXs that are registered to call mgr ??
Hi,I have an issue with 2 Telepresence devices.Cisco Webex Room Kit Mini software version ce 9.6.0 76c1685b70e 2018-11-26Cisco Spark Codec Plus software version ce 9.2.5 9c6d387 2018-05-04 I have configured both devices for registering to a 3rd party...
Just registered a WebEx Pro Kit to Cisco Spark and after registration I cannot sign into the GUI no longer. I factory reset the device and was able to get into the endpoint before registration but once registered trough cloud I cannot sign in. I am t...
HelloDoes anyone what the connector type is used for the HD-SDI on the Webex Room 70 Dual G2?We have a microscope camera box which supports HD-SDI with a standard BNC but struggling to find what the connector type is on the 70 Dual G2 to get a suitab...
Hello!We have CUCM connected to VCS through SIP trunk, and VCS connected to ISDN GW MSE8321 through H323. 8321 also connected to Alcatel ISDN. There is IVR on CUCM/CUC. IVR works fine on CUCM and VCS VoIP users. But Alcatel users can’t navigate on I...
Have any information regarding this being supported? It all appears like it should from the codec interface. Connected using same USB adapter make/model that has previously worked with SX products on Crestron systems. Tried 2 of them. No talkback...
I would need to know what is the ideal percentage of the bandwidth that the video signal from surveillance cameras on a network should use? In other words, what is the maximum bandwidth that the video signal on the network can use without interfering...
Hello!I'm trying to find a way to have my Cisco codec and a soft codec share a pair of PTZ cameras. I'd like to use a Cisco Webex Room Kit Plus with two (2) third party IP cameras (that have an HDMI out as well), and a 3rd party control system. Is it...
I am attempting to setup and test a Cisco Meeting Server CMS. I am having a problem trying to get into the web interface, which is continuously showing "Reconnecting". I have tried both versions 2.0.3 and 2.0.7. The install and initial configuratio...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-15-2025 08:06 AM | ||
07-05-2025 02:11 AM | ||
07-02-2025 07:37 AM | ||
06-18-2025 10:21 AM | ||
06-17-2025 05:26 AM |