Considering buying an SX80 codec with a SpeakerTrack 60 camera. I was planning on sending the camera directly into an HDMi matrix and then back out to the codec. This will allow me to also send the camera to a media bridge, or any other place. It app...
Forum Posts
Hello, We have a bunch of these units in our office. I would like to find a way to add an option to attach an external camera and project from the unit to a big TV screen to include more people in the meeting. Many Thanks, Alistair
Hi All, Wondering if its somehow possible for users to edit favourites on the touch 10 themselves? E.g. They will often make a call to a video address, save it in favourites, but then want to get it a more user friendly name.
Resolved! DX80 Network Settings (Hide)
Afternoon community, We're in the process of seeing if the DX80 will satisfy our STIG vulnerabilities. Where I seem to be stuck is with the network settings. We want to hide all instances of the IP address being displayed without a pin or password....
Is it possible to Share content back and fourth through a cisco VC? Our current setup is as follows; we have two endpoints using a virtual meeting room, each endpoint has a Barco ClickShare "CES-200" set up to share the content from each endpoint. At...
Hello, Is there is a way to create a URL with the meeting number that opens the WebRTC meeting sign in page where I only need to enter the password or PIN? Basically, I'm looking for the same type of URL links that Webex, gotomeeting and other ser...
Resolved! MultiSite Not Working from Touch 10
We have a Cisco SX80 with speakertrack running firmware ce 9.3.2 748b9742af6 2018-05-28 and a valid MultiSite option key installed, registered to our on prem Cisco Call Manager running v11.5.1.12900-21. Connecting to multiple sites directly via the...
I'm in the process of setting up Expressway E & C at my company. Right now, we're only using using Expressway to make outbound SIP calls to BlueJeans. Here is the call flow:User dials 62777 > Translation pattern on CUCM forwards to Expressway C SIP t...
Hello Team, I am having Cisco SX80 device. Due to some limitations I have to fit my Codec of the device in HUB room which is 15 meters far from SX80 camera. Is this distance making problem or another reason. Can anyone suggest me the which type of ca...
SX20 is registered with CUCM. mode of SX20 is CUCM. CUCM is pointed to NTP server. IPPhones are showing correct time but not SX20. ntp is auto for SX20 in web configuration. when I entered IP addresss for ntp server time become ok. So question is w...
Hi We currently have CMS, and devices registered to CUCM. If we buy a new device such as a Webex Room kit or SX20/80 etc, what licences do we need to buy? Do we need the SMP for the CMS and TP licence to register it on CUCM?
When I make a video call to a zoom system via SIP from an SX20, the call consistently drops after 30 minutes. I reconnect the call and it drops again after 30 minutes.
Resolved! Update Cisco TelePresence SX20
Làm thế nào có thể làm được với Cisco TelePresence SX20?Quảng chí Quảng Đông Quảng Đông Quảng Đông7.3.6.ea51021
Hi all, Hi all, Wondering if anyone has any prior experience with this scenario. I've got a C60 codec with no software images available. I've been following the steps in this file to load a software package on to it via TFTP but when I get to ...
Resolved! Cisco Room Kit Plus Fallback option
In Cisco Room Kit is there any option to fallback from Ethernet connection to WiFi Connection and Vise Versa during the failure of any of this connection. Is there any way to configure in this way. Thanks
