Just wondering if the Spark Room 70 supports an additional Precision 60? I know that Presentertrack isn't available (at least not yet) for the newer series of endpoints and that you can use a Precision 60 on a Spark Room Kit Plus, just unsure if th...
Forum Posts
Cisco SX20 Remote Not working ,
Hi all, We see In Cisco Spark Codec Plus web interface , we have 3 options for cameras. So we can statically assign serials of cameras with that three options. But with SX80 we have 7 such options. Is there a way to increase it in Cisco Spark Code...
Hi Guys pls find Attachment what do they mean by FW-A and FW-B is Peremiter FW and Inside FW ?????? what if i have only Firewall at Perimeter layer not on the inside ???? it looks a strange Deployment Regards
Hi ; cucm version is 11.5 when we try to video conference 3 sx20 we couldn't call merge
Hi ; cucm version is 11.5 when we try to video conference 3 sx20 we couldn't call merge
Hi All, There is something that have been bothering on my head for quite awhile, and pardon me of my ignorance if any. We have MRA deployed over Expressway (C&E), so therefore I believe all our endpoints registration over the internet and calls are...
I have a SX20 that I upgrade from TC7.3.14 to CE8.3.4. Upgrading from TC to CE required purchasing the TRC6 remote. I notice after doing the upgrade that I was unable to do FECC on the remote endpoint. Does FECC not work with the TRC6 remote control...
Resolved! EX60/EX90 vs larger DX series
Does anybody have thoughts on these. Is it worth it now to buy an EX60 over the larger DX series desktop units? AS I understand the DX are android based where the EX are TC based. thanks ahead of time for any suggestions.
Gents I am trying to use the LDAP integration feature in CE8.2 for user management on our TP endpoints. I am not having any luck with this. I have enabled LDAP configuration as follows, but I dont even see the DX80 attempting to query LDAP for the lo...
Hi,A customer of mine has VCS+VCS 7.2.3.They also have TMS 13.2. They do not have CUCM up and running at all. I am looking to supply to him a room kit plus codec. The data sheets and admin guides for the codec plus mention VCS native registration, bu...
Hello Experts, I am facing one problem, At One of of our customer site we have deployed CMS cluster (Combined deployment). Everything is working fine but in conference we don't see the name of participant or location on display. But if do point...
We are trying to get update firmware for a recently purchased Spark Room Kit Plus - now rebranded as the WebEx Room Kit Plus. While trying to access the software we found the downloads all point to the SX10 Quick set...and as a result we can't get ...
Hi Previously I was deploying an SX20 and an SX10 both as standalone and I was told from the community that H.323 is the way to go, not SIP. Now, recently I have deployed an SX20 at another client's premises, this one is standalone deployment as ...
We're starting to use the API on the CE endpoints. After some initial success, we've hit a problem trying to control the layout in a CMS bridged call. The xCommand "Video Layout LayoutFamily Set" only appears to change the layout of the local share...
