Might be a silly question, Can a codec in direct mode dial by another than just IP address, for instance 1111@publicipofexpressway. Isn't this technically an h.323 ID and without a gatekeeper I don't think it would resolve the SRV records. I hav...
Currently using WebEx CMR with a Cisco Telepresence MX300. I use the SIP URI to dial into the Meeting and enter the Host ID. My webex is set up to not start the meeting until I join as a host, but typically I am not the presenter. I also have the mee...
I'm preparing to create a CMS cluster with 3 db servers. I'm a bit confused by what I find in the available doc: In the document: Cisco Meeting Server Release 2.2 - Certificate Guidelines for Scalable and Resilient Server Deployments: chapter: CSR f...
Hi Experts, we have Cisco Expressway setup for B2B calls. we have 6 RMS licenses distributed between Expressway C & E, which makes it 3 on EXP E and 3 on EXP C. Now I am able to make 3 party conference including the Host. That is myself and 2 other B...
We have a requirement that the expressway certs need to be uploaded again with new key length. I want to generate a new CSR for the same but also want to make sure generating the new CSR wont break anything till signed certs are back, as servers are ...
We're looking to upgrade an existing SX80 system by adding SpeakerTrack. The issue is, we already have 2 cameras, and it seems wasteful to buy 2 more cameras with the SpeakerTrack array. Is it possible to use the cameras we already have? Is there a p...
Hello, I have this enviroment: Call Flow:SX80 -> CUCM -> Expressway C -> Expressway E -> 111@199.48.152.152 How can i create a dial plan on the Expressways to call number@IP? Regards Leonardo Santana
Hi, I have a standalone SX20 at my house which I use to dial into work bluejeans calls. Unlike the units at work it doesn't split the video and presentation onto two screens when presentations are being shared. On the LCD controller it does see tha...
We have an SX80 with software version CE 9.2.2. We have 2 screens for the setup, We have speakertrack and presenter cameras setup and both works fine. But they do not seem to be able to auto switch between the presenter camera and the speaker track ...
Got an interesting situation where endpoints are registered a two VCS part of a cluster. Endpoints on one VCS can all out the expressway zone just fine however endpoints pointing to the other VCS can't search outbound because they see the expressway ...
Hi, Anyone that had installed one MX200 G2 with Floor stand Feet could confirm to me that the back cover is like this on picture? Because i can't close back cover it seems that two male connector are wrong... Regards,
Is there a way for TMS to schedule TP Endpoints to call into a SPARK Space either as an OBTP or as a Schedule select and call?
HI Team , Can i use DX80 device in Standalone mode to make a video conferencing call between two other DX80's ( Standalone mode) Standalone means three DX80 will be Android based software & wouldn't be registered to either CUCM and Expressway In ...
In my CMS deployment I have users in Active Directory and in Open LDAP. I am able to import users individually from each source if I define only one LDAP Source. If I define two the second added source is not added to the user list. My Server i...
Hi, SX80 has issue, its touch panel reboot continuously when power up the SX80. SX80 touch power up through a PoE injector when codec and PoE injector power up at the same time touch get the power and comes to the cisco logo and suddenly its reboo...
| User | Count |
|---|---|
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
.jpg "VIP Advisor"){kind=icon}
